Depends on the wattage of the bulb. Formula is Power (watts) = Voltage * Current (A).
Therefore for a 55w bulb, in a 12V car, bulb draws 4.6Amps.
Larger wires will not reduce the amperage draw of a device. Limiting amperage draw is accomplished by fuses wich blow when the amperage drawn across them exceeds their specifications.
The 194 bulb is ~3.8 watts, at 14 volts they draw 0.271 amps.
Heaters draw a lot more amperage. As your amperage increases, so does resistance to the flow of the current. Too much resistance, and your wire overheats, melts the casing, and can potentially catch fire.
The amperage drawn from a C cell battery is governed by the load resistance. The lower the resistive load the higher the amperage draw from the battery.
Always check the nameplate on the device. It will have the serial no., how many hertz it operates at, the voltage, and amperage. Their are different types, so the amperage will differ as well.
Larger wires will not reduce the amperage draw of a device. Limiting amperage draw is accomplished by fuses wich blow when the amperage drawn across them exceeds their specifications.
Not enough to worry about. That's like asking how many amps does the memory preset's on your radio draw. It is in the .001-.01 range.
Amperage draw, excessive amperage draw, and or dirty & loose connections. This should be checked out if the temperature is elevated when not cranking your engine.
You need to mention the voltage and wattage of the device to get the right answer
The 194 bulb is ~3.8 watts, at 14 volts they draw 0.271 amps.
Heaters draw a lot more amperage. As your amperage increases, so does resistance to the flow of the current. Too much resistance, and your wire overheats, melts the casing, and can potentially catch fire.
Look for an amperage on the ballast. Multiply this amperage by the connected line voltage. This will give you the wattage of the unit.
It looks like you are asking if a higher amperage motor can replace a lower amperage motor. It depends on what the amperage difference is. If the amperage is high enough to move the capacity of the wire out of its rated value then it should not be done.Remember motor conductors have to be rated at 125% of the motors nameplate amperage. As the amperage increases so does the HP and the motor's protection will also have to be increased or the motor will trip the lower overload protection settings.Also keep in mind that if the motor is three phase, running a motor with higher HP on a load that does not need the extra HP, it will lower the power factor of the supply distribution.
The maximum amperage draw or load that the device or wire can safely carry.
How much amperage for a hotpoint 20 inch stove
Generally speaking an appliance (eg tv) is supplied with power so when it is off it has voltage supplied. After yo turn it on it starts to draw power called amperage the voltage doesn't get higheur but the amperage does Amperage is the load being drawn through a circiut
LED headlights are much brighter than normal headlights. Yes, if you see much brighter headlights on a car, they are most likely going to be LED headlights.