1 ton of air-con is defined as 3577 watts
Therefore 20 tons is 71.5 kW. On a 240 v 3-ph system the current for that is 100 amps, assuming a 240 v line-to-neutral voltage, equivalent to a phase-to-phase voltage of 415 v.
Somewhere on it, it will have a specification plate - that will include power and/or current drain. If it has only power, divide that by the supply voltage to get current. Otherwise, the weight of the thing is no clue as to power drain.
To do the proper electrical sizing for an air conditioner connection, watts are not needed. Watts are the product of amps times volts. The voltage needs to be stated for the correct insulation rating and the amperage needs to be stated to select the proper wire size.
Convert tons to watts and divide by the supply voltage. One ton of A/C is 822 watts, so 120 tons is 450 amps at 220 volts.
It depends on the type of it and what kind of house you live in, for example if you live in an apartment, it would cost you less. That's cuz of the air conditioner! <3 you question.
It depends on the EER (Energy Efficiency Ratio), which you did not provide. Please restate the question.
120 tons is a big system drawing 500-600 kilowatts, and it might be supplied at medium voltage (three-phase, more than 1000 volts), so the current cannot be estimated without more details.
The amperage is in direct relationship to the voltage of the unit. The voltage needs to be stated.
10 amps
50 Amps Single Phase 20 Amps Three Phase
The formula you are looking for is I = W/E. Amps = Watts/Volts.
It depends on how many amps it was designed for. A 12.5kV/600v 10kVA 3 phase transformer can handle ~.5 amps on the primary and ~10A on the secondary. A 600/120V 10kVA 3 phase transformer can handle ~10A on the primary and ~50 on the secondary.
The answer is that it depends upon the a. efficiency (to determine its input power). b. supply voltage. c. nature of the supply (single-phase, three-phase, d.c., etc.)
22 kw motor how much takes ampares with load
It means 225 amps on each phase.
50 Amps Single Phase 20 Amps Three Phase
106 amps
9
8,33 Amps
62.5 amps
50 amps.
75 Amps theoretically Need to know if the generator is 3 phase or single phase.
At 240v single phase it's 70.8 amps. If it runs on 2 wires plus ground, take the voltage rating of the equipment and divide that into the watts to get amps. At 480v 3 phase it's 25.8 amps. At 208v 3 phase it's 47.2 amps. <<>> There are zero amps in 14 kW. A voltage needs to be stated. I = W/E, Amps = Watts/Volts.
UK Mains is 230V therefore 6 KW is 6000/230 = 26 Amps. 3 phase is slightly different....... 6000/400V = 15 Amps/root 3 = 8.67 Amps per phase.
UK Mains is 230V therefore 6 KW is 6000/230 = 26 Amps. 3 phase is slightly different....... 6000/400V = 15 Amps/root 3 = 8.67 Amps per phase.
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.