50 amps.
It depends on the voltage of the motor, and whether it is single-phase or 3-phase. A 120 VAC 2HP single phase motor draws almost 20 amps, a 240 VAC single-phase 2HP motor draws about 10 amps. A 480 VAC 2HP three-phase motor only draws about 6 amps.
The horsepower of the motor is needed to complete this answer.
The gravitational pull of the moon, on the earth, is almost a constant - whatever its phase.
The average 17" LCD monitor will pull around 25 to 30 watts. At 120 volts this would equate to 0.2 to 0.25 amps.
12-2 (#12-2 conductor) wire doesn't "pull" 20 amps. However, it's ampacity rating is that of 20 amps. #12 copper wire is rated for a total load of 20 amps. So, always use a 20 amp breaker with it.
5
At 120 volts it will pull 4.166 amps. At 240 volts it will pull 2.08 amps.
It depends on the voltage of the motor, and whether it is single-phase or 3-phase. A 120 VAC 2HP single phase motor draws almost 20 amps, a 240 VAC single-phase 2HP motor draws about 10 amps. A 480 VAC 2HP three-phase motor only draws about 6 amps.
Aprox 12 amps.
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
at 230v it will use 5 to 6 amps
About 2.25 Amps.
10.92 Amp
This typically has to do with how many amps you can safely pull from the secondary of the transformer.
to calculate: 1hp=745W 3hp=745*3=2.2Kw assuming a 3 phase motor power is V*I*pf*the square root of 3 I would gues a PF of 0.8 if its a resonable motor which gives about 7.2 amps per phase. if the PF is bad say .65 it could pull up to 9 amps in short, too little information to give you the actual answer.
The horsepower of the motor is needed to complete this answer.
A pull chain connector. really.Bead chain connector. See related links below.