This typically has to do with how many amps you can safely pull from the secondary of the transformer.
No because the load is 638 VA which is too much for the transformer.
A transformer used to step up or down the value of voltage.
Moisture entered inside the transformer coil may cause loss of IR value. IR value can be increased by removing the moisture. Keep the transformer in a hot air chamber for sufficient time to vaporize the moisture.
A stp-down transformer steps voltage down from a high value to a low value. Transformers only work with AC.
it is the fraction the is the highest in value. because it is really small
frequency. KVA is also same in both side of a transformer!!! KVA means Kilo Volt Ampere.
The power factor is only taken into consideration when the Kilowatts of a transformer is used.
No because the load is 638 VA which is too much for the transformer.
The correct symbol for kilovolt amperes is 'kV.A, not kva. A volt ampere is the product of the transformer's secondary rated voltage and its rated current. It is not rated in watts, because the transformer designer has no idea what sort of load is to be applied to the transformer, and it is the load that determines the amount of watts, not the transformer.
Depends on the transformer. This can range from a few gallons to thousands of gallons.
AL means transformer core property
A transformer used to step up or down the value of voltage.
ampere is the unit of the electric current intensity 1ampere=1coloumb/1sec intensity=quantity/time(by seconds)
Transformers transformer voltage and current, but power stays constant (minus transformer losses, which are typically minor). Power is typically measured in watts or killowatts. A watt is 1 ampere times 1 volt (P = V*I). Thus if a 117 VAC transformer (primary winding) is rated at 10 amps, it is capable of producing 1170 watts. If it's secondary steps down the voltage to 12 volts then it is capable of handling 97.5 amps (97.5X 12 =1170 watts).
I (Amps) = VA / E (Volts) I = 50 / 36 I = 1.39A Do the math!
It is approx. 4.786 days (24 hours)
A variable transformer is capable of changing its output voltage from 0 to maximum output or over a specific range. It is also named an adjustable transformer.