Nominally
(11/3) times (the battery voltage) hours.
Ampere Hour (Ah)The capacity of the battery is represented in Ah. It is the amount of current a battery can give during one hour of charge / discharge cycle. High capacity batteries (100 Ah, 150 Ah) are used to power inverters to get sufficient backup time. The formula to select the battery power (Ah) is Load in watts / Voltage of battery x Backup hour.For example if you wants to run 400 watts load on 12 volt battery for 3 hours, then the capacity of the battery should be minimum 100 Ah.Ah = 400 / 12 x 3 = 100 Ah. If the load increases (within the capacity of the inverter), backup time reduces.
If you know how many amps your load draws then divide this into 26 and your answer will be the number of hours (approximately) you can sustain the load.
For the backup time for 4 fans. First we required battery AH (battery amper) and battery volts & and and ups ratings. then we calculate back time .
Hello friend in d.c power=v*iso, the total power of battery will =12*100=1200 watt or ah .The power will taken by yous load is 300 watt so,the battery can give power upto 1200/300=4 hour .
poda
The energy delivered by a battery would depend on-- the battery's voltage-- the resistance of the load connected across its output terminals-- the length of the time the load is connectedThe power delivered by the battery is [ (voltage)2 divided by (load resistance) ].The total energy delivered by the battery is [ (power) multiplied by (time the load is connected) ].
micromax x11+ talk time of 17hrs
watts is an instantaneous measurement of energy. There is no time component. If you can produce 20 watts, then you can power exactly 20 watts for as long as that is being produced. If you have a 20 watt hour battery, you should be able to power a load requiring 5 watts for (20/5 =) 4 hours.
Backup batteries are very important to have so one does not lose information when the electricity fails. For example, if one has a backup battery in their alarm clock, then the power goes out during the night, then the clock will still keep the time and wake up instead of letting them sleep past their get up time.
Watts are the product of amps times volts. The amperage in a circuit is governed by the resistance of the load. A battery just supplies the potential as voltage, the load determines how much current is going to be drawn out of the battery. Batteries are rated in amp/hours. This means how long can a battery maintain a specific amperage over a period of time.
The APC battery backup is capable of storing a charge when the power is working. When there is a power outage, the stored charge is triggered, and can deliver a steady stream of power for a fixed amount of time.
50 kva ups battery back up