It depends on how much water was in it to begin with and how much water is entering per minute.
93,150,000 US gallons per minute
50 gallons of water per minute equals 3,000 gallons per hour.
150,000 gallons per seconed
880 yards per minute.
The amount of water flowing by the gallon per minute affects water pressure in a way that means the higher the volume of water per minute, the higher the pressure the water will be. There is also the factor of air in the pipes that will slow down water pressure significantly.
When operating, a nuclear power plant needs about 750,000 gallons of water per minute! When being shut down (as in the case of an emergency) the cooling operation requires about 25,000 gallons per minute.
Easy to figure out 2.2 * 8 = 17.6
50 feet per minute.
Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.
Let me try and give you a hint. There is something called fluid flow formula. You basically need to know the speed at which the water is flowing and (in this case) the hose length and diameter. Well, it depends on how fast the water is running. Get a clock. Start filling a 10 liter bucket and stop after one minute. Is the bucket full (10 liters per minute), or half full (5 liters per minute)? Or did the bucket fill in half a minute (20 liters per minute)? The answer is in your hands (or in your bucket).
300 gallons per minute