Use a magnet to filter it out. Put the magnet in a plastic bag so the powder does not stick to the magnet directly. Put the powder into some water and the iron with sink and then you can get the sulphur first and then the iron.
Added:
The other possibility is to dissolve sulphur powder in Carbon disulphide ( CS2 ).
The only disadvantage is, that this water immiscible fluid is rather stinky (rotten cauliflower) and highly flammable.
I would use an electromagnet. Spread the mixture out on something, turn on the magnet and move it over the mixture to pick up the iron. Then hold the magnet over a container, turn it off, and the iron will fall into the container.
bring a magnet close to the mixture and iron will stick to it. It is a pain to get off of the magnet so it may be better to do through a sheet of paper
A magnet.
Iron (along with cobalt and nickel but no other elements) is magnetic and will be attracted to the magnet. The sulfur will be left behind.
Magnetically remove iron powder followed by dissolving sulfur powder in carbon disulfide (!flammable!) and filtering off the leftover iron sulfide.
how could you separate iron from sulphur in a mixture
Put the mixture through a magnetic field. The iron will be drawn to the magnets, sulphur will not.
Use a magnet. Sulphur is not attracted to a magnet, but iron is.
A magnet will pick up the iron.
An electromagnet would be the best thing.
Carbon disulfide can be used to separate a mixture of iron filings and sulfur. This is because carbon disulfide can be used to dissolve sulfur, thus leaving you with the iron filings.
If it is a simple mixture of Fe and S you can use a magnet to separate iron. Of course, the method is not valid for an iron sulphide.
Iron sulfide
Iron powder is attracted by a magnet (so it can be 'drawn' away),Sulfur is dissolved in carbon disulfide (so it can be filtered through, leaving iron behind),But be careful: it is explosive, toxic and stinks (rotten cauliflower)
Sulfur and iron filings together are a mixture.
Carbon disulfide can be used to separate a mixture of iron filings and sulfur. This is because carbon disulfide can be used to dissolve sulfur, thus leaving you with the iron filings.
because a mixture is physically combine while a compound is chemically combine thus make is eaiser for the mixture to separate using the technique magnetic separation.
Yes, a magnet is one way that can be used to separate a mixture of iron filings and sulfur.
No, heating would not separate iron and sulfur.
magnet is used to seperate iron dust and sulfur dust mixture
a magnet
If it is a simple mixture of Fe and S you can use a magnet to separate iron. Of course, the method is not valid for an iron sulphide.
Use a magnet to lift out the iron filings.
Iron sulfide
If the mixture is powdered sulfur and iron filings, use a strong electrostatic field. The sulfur will jump to the opposite charge leaving the conductive iron behind. ***************************** Or, you could add carbon disulfide which would dissolve the sulfur.
I assume "iron filling" is supposed to mean iron filings? In this case, I would use a magnet to separate the two. The iron filings will stick to the magnet, leaving the sulfur behind.
Iron powder is attracted by a magnet (so it can be 'drawn' away),Sulfur is dissolved in carbon disulfide (so it can be filtered through, leaving iron behind),But be careful: it is explosive, toxic and stinks (rotten cauliflower)