What would you like to do?
Most of the new TV's display a blue screen when there's no signal for it to lock on. Try unplugging it for about 5-10 minutes and see if that clears up the problem. Why? Because they have microprocessors in 'em (computer chips) and just as like with any other operating system, they can hang up or crash. This isn't an uncommon problem with today's TV sets. Unplugging it for awhile resets the microprocessor (in other words, it causes it to re-boot when you plugit in again).
12 people found this useful
Was this answer useful?
Thanks for the feedback!
Answer program could be widescreen
Sadly, the days of tinkering in the back of a television to fix it are well and truly gone. Even independent TV repair companies are limited to replacing modules in LCD and Pl…asma screens. Anything more intricate and they have to go back to the manufacturer. Without the right parts, manuals and test equipment, there is simply no way to do it yourself. Even worse, repair costs are so high these days, that often it just isn't worth getting a repair done because it can be more than buying a new one.
When hooking up s-video on compaq laptop to the t.v. and when i play movie on my tv screen and there is pictures but no sound.... how do i get sound to work when using s-video to tv?
Good Question, Ready here you go......You got to pick up a wire with a headphone jack on one end and a dual RCA plugs on the other end. Then if you have a audio input connec…tion on the back of your tv you plug it in or in to a input channel on your receiver and select that channel when you power it on. Afterwards look for the little headphone logo with the jack underneath it and plug in your headphone plug. You may want to lower the volume on the laptop and on the TV or Receiver and adjust the sound output. Follow these same steps with your IPOD or MP3 Player, Blackberry Phone to stream your tunes. The wires range from 99 cents, I have gotten lucky at the dollar tree, or up to $20.00 at your local audio spot. Good Luck DJ FLIP Housepartykings.com
MY LCD 32 inch TV has no picture at all, ony has sound and the TV is only one year old. What could be the problem? .................... If there is no "glow" around the ed…ges, then your back light probably has burned out and will need to be replaced. LCD's have a fluorescent backlit bulb and these will burn out over time. See your owners manual or contact the manufacturer for details on how to change this bulb.
A blue screen usually means there is no signal on the input selected.
It often means there is no signal being fed into what ever input you have selected. If you have VIDEO 1 selected and there is nothing connected to the VIDEO 1 connector you wi…ll only see a blue screen.
Why does my 42 inch plasma tv have a light blue screen The cable sound comes through and you can control the DVR still?
Because you pooped on it!
I have insignia ns-27lcdi am having problem with my tv when i turn it on it turns on the red sign of power turns blue but screen stays black and no picture or sound and i can't do anything?
It sounds like your set is looking for an input device. If you have cable/satellite, be sure (from the menu) that you have it set for cable(same as satellite) or AI…R, if you're using an antenna. The blue light sounds like the input source is set for video(dvd), games, or Video tape.
it has something to do with the portable itself, ya shud check it out , perhaps cleaned it up and perform trouble shooting,,..if things has been exhausted in your end go visit… near repair shop and have it check...
Why is the light on power no picture tv
There are several things that can cause a lcd tv to have sound but no picture. If the backlight of the lcd panel comes on momentarily when first turned on, the problem is most… likely caused by defective backlights which are part of the lcd panel. If there is no backlight when first turned on problem may be inverter circuit or power supply. If the backlights come on and stay on the problem could be the tcon pcb or the main pcb. The tcon is sometimes available but most of the time part of the lcd panel. Unfortunately this symptom usually is cured by replacing the lcd panel which is most cases is cost prohibitive.
plug the yellow cable in
It probably means the input is not connected
When hooking up s video on compaq laptop to the tv and when you play movie on your tv screen and there is pictures but no sound how do you get sound to work when using s video to tv?
S video is an interface for video only and does not carry sound. You will need to connect the sound using a 3.5mm jack connector on the computer to (probably) 2 RCA or phono c…onnectors on the television.
Go to the Start Menu > Settings > Blue Screen of Death > Off
Why is your portal 2 not working the loading screen is blue and when the level loads the screen is black with the 2 orange and blue switl thingsalso comentary works as does sound its just the video?
Much be a loading problem, most common way to fix is to find and install latest patches and updates. For this is a software issue. I suggest you update your graphic card d…river also try to run the game "as administrator".
Use a VGA cable and an audio cable to connect to the TV, if these are not found on the TV, use an HDMI cable. Make sure your tv and computer have the same kind of port.