According to the itt book ;)
I came up with:
Connectors for twisted pair cable include the modular RJ type of jacks and plugs (RJ-11;RJ-14; RJ-22; RJ-25; RJ-31; RJ-45; RJ-48; RJ-61) (of four, six, and eight position configurations) along with the hermaphroditic connector employed by IBM. The hermaphroditic connector is specific to STP and is also known as STP connector, IBM data connector, or universal data connector.
The connector used with patch panels, punch-down blocks, and wall plates, is called an IDC (insulated displacement connector).
If considered a connector, there is the modular Y-adapters used for splitting usually in 10Base-T, Token Ring, and voice applications. Also, if considered a connector, there is the crossover cable which is wired to a T586A pinout scheme on one end and a T586B pinout on the other end.
Coax connectors used with video equipment are referred to as F-series connectors (primarily used in residential installations for RG-58, RG-59, and RG-6 coaxial cables). Coax cables used with data and video backbone applications use N-connectors (used with RG-8, RJ-11U, and thicknet cables). When coaxial cable distributes data in commercial environments, the BNC (Bayonet Niell-Concelman) connector is often used. It is used with RG-6, RG-58A/U thinnet, RG-59, and RG-62 coax cable.
Fiber-optic connectors include SC, duplex SC, ST, duplex ST, FDDI, and FC. These relate to different types of fiber-optic cables and configurations. Three of the SFF connectors that have been propagated (during the life span of the book) for fiber-optic cables were LC, VF-45, and the MT-RJ.
you can try theworldofcomputer.com, there many resources about hardware and software that could help u... try it, i give the link below
one's connected and one is not connected
Cable connectors are used on coaxial cables, which are ports in the wall that connect to a TV. The connectors are used to either link together two coaxial cables or split it off into more than one.
RF connectors are designed to maintain the shielding that the coaxial design offers and are typically used with coaxial cables.
RJ45 is a 8 pin connector used on networking(ethernet) cables RJ11 is 6 pin connector used on telephone cables in the USA
RJ45 connectors are used in "ethernet cables". These cables connect network devices between computers and systems.
The most common connectors for coaxial cables are F-type and BNC.
Common connectors for fiber-optic networks are SC, ST, and LC. These three types of fiber-optic connectors are half-duplex, which allows data to flow in only one direction. Therefore, two cables are needed.
Twisted-pair cables Coaxial cables
What are the types of cables used in automobile industry and there specification.
There are several types of video cables. These types include: coaxial cables, HDMI cables, component video,S-Video, and standard video cables. There are used to connect the various pieces of equipments that we use today.
The most popular connectors found these days on the ends of network cables are commonly called RJ45 connectors.
DTF