Diagonally.
You simply go to the television's menu and select PC mode. This mode is confused to be used as an actual computer screen monitor, but is actually used to see a better game experience from your game console/system
The acronym DPI is most often used for dots per inch. The acronym is commonly used in measuring computer monitor, television, and printing clarity.
Monitor - TV - was created in 1983.
computer
A viewsonic tv monitor is a computer monitor that can also function as a tv even with the computer off. It works like a regular monitor that can be switched over to a tv at the press of a button.
They are higher resolution.
monitor mode is only available in forge mode and when you are in it you can spawn alot of stuff such as cars, scenary, weapons, teleporters, and spawn points.
No I don't think you can.
you need a instruction manual of car monitor
Probably, but most likely you'll have to use audio/video cables for the connection ans witch the TV to video inpute mode. As far as that goes, you could also use a VCR as a TV tuner.
This depends on whether you mean video mode as in like a DVD vs tv mode, or as in like you are using your HD flat panel television for a computer monitor. Here at the fork in the road, the first is a simple answer. Most user interfaces on newer televisions (that support multiple input sources) will have an "Input" button or "Source" button on the remote. Simply press the input button several times, and each press will cycle to the next input source, and after 3 or 4 presses will start from the top of the list again (eg. tuner>input 1>input 2>RGB source> back to tuner). On the less traveled road, if you are using your tv as a computer monitor: If you are using an SVideo or single RCA connection on legacy video cards - forget it, because it's like watching television through a fogged up window at best. However, an HD television can act as a secondary or primary computer monitor. The cable between your video card and the television will be a DVI (male to male) or a VGA (male to male) cable. If the connectors are different on the video card and television, you can get a converter cable (Male to Male) DVI <-> VGA. If the television is setup as a secondary display, you can right-click on an empty portion of the desktop (in Windows 98 and later), select properties, and then go to the settings tab. Here you will see a drawing of a crt, and in the case of 2 monitors, 2 rectangles on the monitor with one grayed out. Right click on the Grayed out monitor and specify "monitor is attached/present"... and Voila!
A tv has a tuner.A monitor does not.If you have a digital cable box you can hook a monitor up to it and watch tv on it.If your tv has hdmi or vga you can plug it in to your computer and use it as a monitor.