rectifiers are used in electronics to convert the sine wave into its +ev side only.there are two rectifiers half wave and full wave rectifier half wave take +ev of only one cycle and full wave rectifies whole cycle to its +ve.
rectifier is important device in electronics or in process of converting alternating quantities into direct quantitydue to which we can easily convert AC INTO DC..............
The Rectifier is an electronic device, which converts an AC waveform(Usually a Bi-directional waveform with Zero Average value) to a Pulsating DC waveform (Uni-directional waveform with Nonzero Average value). As AC wave (Sinusoidal) has two half cycles, namely - Positive Half cycle & Negative Half cycle If a Rectifier does it's operation only in one half of the cycles, it is known as Half Wave Rectifier. Similarly, If a Rectifier does it's operation in both the half cycles, it is known as Full Wave Rectifier.
rectifier is not used because of damaged of problemAnswer.Because there's no need for that since the lamp on your bicycle can still work on the induced AC power.
such a control rectifier that control or rectifier single phase. for that purpose we used SCR that is called single phase controlled rectifier.
Nothing will happen to the diode but that rectifier effectively becomes a half-wave rectifier.
when rectifier is on, the capacitor is almost transparent (it charges to the voltage provided from the rectifier) when rectifier is off, capacitor holds the peak voltage since it stored a charge during rectifier on time.
The alternator diode rectifier converts the AC current being produced by the alternator to DC from which most of the electronics installed and battery use.
The Rectifier is an electronic device, which converts an AC waveform(Usually a Bi-directional waveform with Zero Average value) to a Pulsating DC waveform (Uni-directional waveform with Nonzero Average value). As AC wave (Sinusoidal) has two half cycles, namely - Positive Half cycle & Negative Half cycle If a Rectifier does it's operation only in one half of the cycles, it is known as Half Wave Rectifier. Similarly, If a Rectifier does it's operation in both the half cycles, it is known as Full Wave Rectifier.
A rectifier circuit produces a unidirectional wave form.
Yes
1. One that rectifies: a rectifier of many wrongs. 2. Electronics. A device, such as a diode, that converts alternating current to direct current. 3. A worker who blends or dilutes whiskey or other alcoholic beverages. Source: Answers.com
A diode is used to stop the negative voltage swing in an AC signal, so you only get the positive portions.diode-rectifier
You cannot use a rectifier to go from DC to AC. You need an oscillator.
No. For that, you need an inverter or a generator.
there is no need of bulky centre tap in a bridge rectifier. TUF(transformer utilisation factor) is considerably high. output is not grounded. diodes of a bridge rectifier are readily available in market. *the PIV(peak inverse voltage) for diodes in a bridge rectifier are only halfof that for a centre tapped full wave rectifier,which is of great advantage.
bridge rectifier is the best rectifier.
rectifier is not used because of damaged of problemAnswer.Because there's no need for that since the lamp on your bicycle can still work on the induced AC power.
No. For a full wave rectifier, you need two diodes and a center tapped secondary, or you need four diodes and a non-center tapped secondary.