check under the dash someware behind the conselle
Hook up a scan tool or take it to your dealer.
most Honda usually have them on the right kick panel its a two or three wire connection
There is a two wire connector on the passenger side. You can attach it there. You can also go to anyplace like NAPA or Advance and they will do it for you plus tell you what it means.
With a scan tool.
Scan it with an OBD2 scan tool.
This is at the transition from disconnect battery for thirty seconds to it must be done with a scan tool. Your local parts store that caters to the retail buyer will be happy to hook up scan and clear codes.
It is under the dash on the driver side.
You reset it with an OBD2 scan tool.
The DTC (Diagnostic Trouble Code) connector would be located under the drivers side of the dash. Plug the scanner into the DTC connector and then follow directions that came with your scan tool.
you either need a good scan tool take it to a shop that's has a scan tool or take the terminals off the battery for 5-10 mins but this might reset something u don't want to be reseted i would suggest a scan tool
need factory scan tool or aftermarket scan tool need factory scan tool or aftermarket scan tool
you need to hook up a good scan tool that will have the cam/crank feature.