If you mean to reverse the direction of a three phase motor, you just switch any 2 leads. switch 1 and 2, or 2 and 3, or 3 and 1.
Then it is not a three phase motor.
by changin the freq usin an IGBT.
Yes if it's a dc motor with a permanent magnet field, or if it's a 3-phase ac motor. No if it's a single-phase ac motor or a dc motor with a field winding in series or parallel with the armature. <<>> Single phase AC motors can be reversed by using a reversing switch. Reverse either the start winding or the run winding connections but not both.
To use a single/one phase motor instead of a three phase motor is possible if you have a three phase power supply as you will only need to tap one of the three phases together with neutral and an earthwire, however to use a three phase motor instead of a single phase will require the provision of three phase power supply.
If it is a three phase motor just interchange any two of the three wires. If it is a single phase motor, which is also known as a split phase induction motor, it has two sets of coils and a centrifugal start switch. The start winding is in series with the start switch. The start winding provides a rotating magnetic field in one direction enabling the motor to start. The motor can be reversed by reversing the connections of either the start winding or the run winding but not both.
Then it is not a three phase motor.
If a three phase motor in running in reverse, then one of the phases is reversed, plain and simple. If the wiring is correct at the motor, perhaps the phase reversal occurred someplace else.
There are two alternate methods depending on whether the motor is single phase or three phase. On a single phase motor, reverse either the start winding coil lead or the run winding coil lead but not both. This action will reverse the motor's rotation. On a three phase motor, interchanging any two of the three coil leads will reverse the motor's rotation.
Switch two of the three wires.
yes
If you reinstall a three-phase motor with two of the supply conductors interchanged, then the resulting negative phase sequence will cause the motor to run in reverse.
motor is designed to operate in forward and reverse direction for the purpose of elevator. Phase sequence protection is not required.
three-phase motor: Swap the connections of any two phases to the motor.single-phase motor: Usually this can be achieved by reconnecting the starting capacitor from one motor winding to another.Another AnswerAs you have no access to the motor's phases, you must interchange any two of the three line conductors.
No, unless it is a three phase motor and you reverse only two of the phases.
by changin the freq usin an IGBT.
Yes if it's a dc motor with a permanent magnet field, or if it's a 3-phase ac motor. No if it's a single-phase ac motor or a dc motor with a field winding in series or parallel with the armature. <<>> Single phase AC motors can be reversed by using a reversing switch. Reverse either the start winding or the run winding connections but not both.
To use a single/one phase motor instead of a three phase motor is possible if you have a three phase power supply as you will only need to tap one of the three phases together with neutral and an earthwire, however to use a three phase motor instead of a single phase will require the provision of three phase power supply.