first remove the viscus fan off the water pump mark it up first so the holes go on the same studs they came off.
looking on the front of the engine there is a light alloy tensioner that has a smooth face round the pulley, there is a 14 or 15m bolt head on this. What you need to do is put a ring spanner on this bolt and then pull it clockwise { it is very hard to move with just a spanner } What I do is fit the ring spanner on the bolt head then get a socket and extension bar on the open end of the spanner to give extra leverage.
Once there is enough slack on the belt remove it off the pulleys.
Refitting is the same as removal I find it easier to put it on the alternator last.
You can find the thermostat on a 1995 Lexus GS300 near the radiator. To locate it, remove the upper hose assembly where it hooks to the radiator.
Not to my knowledge. However the previous owner may have had one installed.
Check thermostat first
That would depend on which engine you have . On my 1995 Ford Explorer , with the 4.0 L - OHV - V6 engine , it's on the drivers side of the engine below the power steering pump
Remove battery connections, then slacken the serpentine belt. Removal of alternator is simple and straightforward, 3 bolts, replace in reverse order.
How do you install a oil pan gasket on 1995 Lexus sc400
Serpentine Gallery - album - was created on 1995-09-11.
don't get a Lexus
how much should it cost to rebuild transmission on 1995 Lexus es300
Yes, there is a diagram for a 1995 Dodge Spirit Serpentine Belt Diagram. It is found in the maintenance manual to the car.
You can get a serpentine belt diagram for your 1995 Eagle Talon at most Chrysler dealerships. Most auto-parts stores will give you a diagram when you purchase the serpentine belt.
Draw a scetch of the belt path first first. Remove the 4 bolt pully that will not allow the removal of the belt. Install new belt and replace pully.