Most likely not. If the sensor reads hot it will short to ground through its casing and trip the warning signal. The tape can prevent it from reaching ground.
Many fittings, except unions, require the use of teflon tape.
Yes, otherwise you will have leaks
Teflon
yes
Since water can leak through the smallest cracks and holes, applying a clockwise layer or two of teflon tape to the threads of a plumbing connection can help prevent water leakage.
Teflon tape is a staple in any plumbers tool box. The tape is water proof and does not gum up, causing problems with connection.
Teflon tape is a solid.
no.
Teflon tape is very strong and can withstand high usage. It is commonly used for plumbing purposes such as sealing air and water from leaking from pipes.
Teflon tape only, no joint compound. Two or three wraps is plenty... Yes agreed, teflon tape will make it easier for repairs in the future
No, teflon tape (and pipe dope, for that matter) should never be used on flare fittings. They are designed to seal without tape or dope, and may actually leak if tape or dope is used.
Pipe dope better solution than tape.
If you are running natural gas or propane, gas teflon tape. Otherwise, any white teflon plumbers tape is fine.
Many fittings, except unions, require the use of teflon tape.
Yes, otherwise you will have leaks
Teflon tape is a solid.
You have to use pipe dope or Teflon tape on the threads before you put it together. Pipe dope should fill the threads and if tape is used, 3-4 layers of tape should be enough.