That would work on cars before 1995 but it will not now. The computors have more knowledge and have to be reset with a scanner.
Check the battery cables and ensure that they are CLEAN and TIGHT. That is the most overlooked thing.
NO.
Your battery has low voltage and needs recharged, check for loose battery cables, if the light stays on have your alternator checked.
remove negative and positive cables,take battery holddown bolt off,remove battery! when installing new battery, battery hold down first then install the cables , neg first!dont forget to reset radio.
first remove the cables from battery, neg, than positive, remove hold down bolt on bottom of battery. remove battery.
Remove the positive battery cable from your 2000 Chevy Malibu battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
1. UN HOOK THE BATTERY CABLES. 2. TOUCH THE ENDS OF THE LOOSE CABLES TO EACH OTHER FOR 5 SECONDS. 3. CONNECT CABLES BACK TO BATTERY, POSITIVE FIRST. This is the advise I found on line.
Disconnect battery cables from battery for 30 minutes and then reconnect battery it then resets.
Replacing a battery in a 2001 Chevrolet Tahoe is very easy to do. You will just need to take off the battery cables off the battery and put them to the side. Remove the old battery and replace with the new one. Put the cables back on the correct posts.
this resets the computer in most cars. take the battery cables off the battery and touch them together your computer is reset.
disconnect the battery cables overnight and it should reset the computer
Pull off the battery cables and replace