Amps are units of current, watts are units of power. Watts are the product of Amps times Volts. Watts = Amps x Volts.
Just take the voltage and multiply it by the amps. That should give you a close approximation of the watts used. For instance, 117 volts at 4.5 amps = 5265 watts.
Just multiply. (Note, this assumes no phase difference.) <<>> The formula you are looking for is W = I x E. Watts = Amps x Volts.
Using Ohms law, the resistance can be calculated by using the following formulas. R = Watts/Amps (squared). R = Volts (squared)/Watts. R = Volts/Amps.
On this calculation I am assuming that the light bulb is using a 120 volt source. Watts = Amps x Volts. Amps = Watts/Volts, 40/120 = .33 amps. R = Volts/Amps, 120/.33 = 363.6 ohms resistance in the 40 watt light bulb.
The current draw in amps mulitiplied by the voltage.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
Watts = Volts / Ohms Watts = Volts x Amps
As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts
There is no direct relationship between watts and volts. Watts = volts x current in amps.
There is no direct conversion between the two. You need to know voltage to calculate amps. This is the equation: P = V * I Where: P = Watts V = Volts I = Amps
You cannot convert watts to amps, since watts are power and amps are coulombs per second (like converting gallons to miles). However, if you have at least least two of the following three: amps, volts or watts then the missing one can be calculated. Since watts are amps multiplied by volts, there is a simple relationship between them.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
You multiply volts by amps to get watts. What are your amps?
Watts are the product of amps x volts.
Get the volts and multiply that by the amps. This will give you the watts.