Just multiply.
(Note, this assumes no phase difference.)
<<>>
The formula you are looking for is W = I x E. Watts = Amps x Volts.
Divide Watts by Volts ; this gives you Amps.
Amps are units of current, watts are units of power. Watts are the product of Amps times Volts. Watts = Amps x Volts.
Using Ohms law, the resistance can be calculated by using the following formulas. R = Watts/Amps (squared). R = Volts (squared)/Watts. R = Volts/Amps.
There are zero volts in 6 VA. The VA stands for Volt Amps. VA for all intents and purposes is the same as watts. You need to state an amperage to find the voltage. Volts = Watts/Amps.
On this calculation I am assuming that the light bulb is using a 120 volt source. Watts = Amps x Volts. Amps = Watts/Volts, 40/120 = .33 amps. R = Volts/Amps, 120/.33 = 363.6 ohms resistance in the 40 watt light bulb.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
Divide Watts by Volts ; this gives you Amps.
To calculate watts, you need to multiply the voltage (in volts) by the current (in amps). For the 208 volts, 8 amps heating element: Watts = 208 volts * 8 amps = 1664 watts For the 110 volts, 8 amps heating element: Watts = 110 volts * 8 amps = 880 watts
You would have to know either the value of Volts or Amps to calculate that. watts = volts x amps Without either of those values nothing can be done.
If the wattage of a load is known then the current can be calculated. Watts equals amps times volts. You would use the following formula, Amps = Watts/Volts.
As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts
In normal simple circuits WATTS = VOLTS x AMPS So if you use a 12V car battery 4 amps is 48 Watts American 110V mains 4 amps = 440 Watts English 240V mains 4 amps = 960 Watts
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
Depends on the voltage. AMPS X VOLTS = WATTS 250 Watts at 12 V would be about 21 Amps, while 250 watts at 120 volts would be 2.1 amps.
Watts = Volts x Amps. 12 megawatts = 12,000,000 watts. You need to know current to calculate the voltage.