If it still pumps out the water, then it is probably the "motor coupler."
Note: There is a link below to show you a typical installation. The cause for this failure is usually over loading the washer.
A big red alien comes down from the sky and zaps your washer and then it spin drys!
my washer keep on by passing the spin cycle and will not drain out the water.
maybe if you spin the spring washer and its shortened the washer move is verry fast.
it broke. you mst get another.
check the lid switch it is under the top of the washer and is usually activated by a pin attached to the lid of the washer
What it probably means, is that you should call a technician.
kenmore washer 3 110.24944301 water run during the spin cycle what part would i be looking at to fix this
Your washer has little "legs" that you can adjust. They usually can be found under the front of the washer and to adjust you unscrew them up or down.
my frigidaire top load washer makes loud noise in the spin cycle
Motor defect most likely ... or the transmission unit of the washer.
There is a problem with the 'wig/wag', the device that switches transmission into spin/drain. They are not difficult to repair. Google it or look on Youtube.
Press Power on button, do NOT select a cycle, Press and hold the "Spin Sense" Button then spin shows up in the screen, select spin speen and time will show up in the frame select "start" and you're go to go.