any 4 speed tranny from a 340 engine will bolt to a 273, 318, or 360 engine as they are all the same engine block.
it is a manual 5 speed tranny.
you can bolt the engine in place with motor plates and then you will probably need to make a new cross member for the 727 transmission to mount and of course you will have to have a new drive shaft made.
Saginaw 4 speed. It is an exact bolt in. Only change is you need a 4 speed shifter.
should not have a filler bolt should just fill straight thru the dipstick pipe on transmission
What about it? Chevy will interchange regardless of the years. Wiring and plumbing is going to vary but it will bolt to the transmission. Buick, Olds, Pontiac will interchange with each other with the same issues. They will not bolt up to a chevy transmission unless you have a duel pattern transmission that has both bolt patterns on it.
no the 2.0 is a narrow block and the 2.6 is a wide block.
if you can find a bell housing that will bolt up to the engine you will be in business.
No, there is no place on the back of the transmission to bolt it to.No, there is no place on the back of the transmission to bolt it to.
No
a-833 overdrive four speed. dodge started making them in 1975. it will bolt up to a 318 provided you have the correct bellhousing for the 318 as the ;leaning tower of power' bellhousing wont fit.
5*4.5
no
It's a 5 BOLT X 4 1/2.
It's a 5 BOLT X 4 1/2.
A powerglide is a 2 speed automatic transmission.
No, the V6 won't bolt up to the 4 cyl transmission.
If it is a hydraulic cluth then there isn't really an adjustment. If it's mechanical then just loosen the bolt/nut on the fork on the rod going to the transmission.