This motor is able to work from the battery. The speed is less complicated to use and you do not need much voltage.
A feedback control system can be made involving microcontroller 8051, inverter(gating circuit), power processing unit, induction motor whose speed is measured via digital tachometer. The microcontroller will act as a Frequency Counter, Comparator and PID Controller. The output from tachometer(digital) will be given to microcontroller which will compare this to the reference signal and then pass the control signal to gating circuit.The power unit's output will be given to motor.
Yes. You probably don't want to do so directly unless it's a really small motor. An H-bridge, or similar circuit is probably easiest to use. The microcrontroller would interface with the computer, likely through a serial link. The microcontroller would then control the H bridge through several outputs. Depending on the microcontroller, H-bridge design, and motor to be controlled, the microcontroller might not be able to drive the H-bridge and an intermediate driver chip may be needed.
hi
You should clarify, advantage compared to what: for instance muscle power, gasoline engine, etc.
tel me the connections of 6wire stepper motor with 8051 microcontroller
using a programmed microcontroller, modem and other components like RS232, ATcommandes etc you can do it.
The DC series motor is a high torque motor. so that it can pull heavy loads such as traction, lifts etc., the control of speed of a DC series motor is very smooth and easy.
What is the advantage and this advantage of a forward reverse control of a motor
first use of one motor at chasis for control of gripper nad one motor control of up and down of gripper set and then this two motor control by motor shiled and then control of motor by remote control
there fast!
mcc - motor control center or motor control console. A motor control center (MCC) is an assembly of one or more enclosed sections having a common power bus and principally containing motor control units
Caravan motor movers offer many advantages. Their main advantage is their ability to move the motor vehicle automatically, which includes turning and stopping.