There are many advantages to using tachometry as a method of detail surveying. They include that a tachometer is easier to use in locations where chaining is difficult, and it is an easier way to measure when accuracy is not particularly important, saving time and money.
The method of using specialized instruments and geometry to determine distance and elevation of specific areas is known as surveying. Surveying is used to build roads and to establish property lines of real estate.
Surveying. Since 1940, aerial photography and since 1980, satellite photography have been more widely used.
Isaac newton created the white light compotation
may be chance to contamination highly
The method used to measure lines of longitude and latitude to determine exact location is called geodetic surveying. It involves the use of specialized instruments such as theodolites and GPS receivers to accurately measure angles and distances on the Earth's surface. These measurements are then used to calculate the precise coordinates of a particular location.
There are many advantages to using tachometry as a method of detail surveying. They include that a tachometer is easier to use in locations where chaining is difficult, and it is an easier way to measure when accuracy is not particularly important, saving time and money.
the advantages of this method was that it is more quick and less calculation needed and the disadvantages, it less accurate compare to the rise and fall method.
Advantages of Traverse Surveying: Traverse surveying creates a closed loop, which confirms the accuracy of the survey. It is suitable for surveying large areas with a minimum of time and effort. This method can be used for both plane and geodetic surveying. It is easy to calculate the coordinates and areas by using the traverse surveying method. Disadvantages of Traverse Surveying: The accuracy of the survey is dependent upon the accuracy of the instruments used for the measurements. This method requires a long base line which is not always available in certain circumstances. Traverse surveying is not suitable for rough terrain as measurements can be affected by uneven ground. It is difficult to locate the exact points when the measurements are taken from a long distance.
The disadvantages of the polygon method include a lack of accuracy as well as detail. Advantages include its ease of use. The component method is much more exact, but is tougher to achieve.
Traverse surveying is a method used in land surveying to establish control points and boundaries by measuring a series of connected survey lines. It involves measuring both angles and distances between points to accurately map out the boundaries of a piece of land. Traverse surveys are commonly used in construction and engineering projects to create detailed site plans.
In the SQ4R method, the purpose of surveying is to skim through the material before reading it in detail. This helps you gain an overview of the content, identify key points, and prepare your mind to absorb the information more efficiently during the reading phase.
1, describe the methode of reducing the levels and thier relative advantages and disadvantages 2, writetypes of levelling instruments and methodes of leveling
Radiation intersection traversing resection
method of linear measurement
Surveying
the advantages of deductive method
The conclusion of traverse in surveying is the final determination of the lengths and directions of all survey lines, typically shown on a survey map or plan. This information is critical for accurately defining the boundaries and features of a piece of land.