0
What else can I help you with?
What is an intermediate sight in surveying?
On a typical boundary survey the instrument is sighted on a point from which angles will be measured, the backsight, and the next survey point where the instrument will be set up to continue the survey around the property, the foresight. Intermediate foresights, often "called sideshots," are points to which measurements are made other than the foresight or backsight. For example, a survey instrument is set up over a point. The horizontal angle on the instrument is set on 0 while sighting on a backsight point that may be a couple hundred feet away. A measurement will be taken to the foresight point which may also be a couple hundred feet away. There may be a survey marker near the point where the instrument is set up to which a measurement needs to be made. This measurement is called an intermediate foresight or a sideshot.
Who was thane yost?
Thane Yost was the singular point in the revival of the Brown Dragons.... he used his legendary wit and cunning to circumnavigate a point between the plane of Atari and the plane of Algora and resurrected Beatrice to defeat the melancholy of Arthur the Vain. After a long fought battle Thane Yost banished Arthur's soul into the sword of the Crystal Flame and broke it into 13 pieces. Each piece has been hidden away to prevent Arthur's return. Today only 6 of the 13 pieces have ever been located. Thane Yost lives on forever as the savior of all mankind and the messiah of the Brown Dragons.
You're the pilot of an airplane that travels from New York to Chicago-a distance of 800 miles and the plane travels at 200 mph and makes one 30 minute stop what is the pilot's name?
It is tricky. Yes you are the pilot.But none of the answers point to that.I would say. . .yes you are the pilot and you can tell.
What is the starting point in drama just the starting point?
a stimulus.
What does Brutus tell the audience about his mental and emotional state at this point?
We cannot know what Brutus tells the audience at that this point if you do not tell us what this point is.
What is the differences between radiation and intersection method in plane table surveying?
Radiation is suitable for locating the objects from a single point , while Intersection is suitable for the inaccessible points by intersection of rays drawn from two instrument stations.
How do you bypass a building obstacle in chain surveying?
To bypass a building obstacle in chain surveying, you can use the method of offsetting. First, measure a perpendicular distance from the obstacle to a point on the chain line. Then, record the offset distance and measure the distance from the last surveyed point to the offset point. Finally, continue surveying beyond the obstacle by applying the recorded offset to maintain accurate measurements.
What is transit stadia traversing?
Transit stadia traversing is a surveying method used to determine the positions of points in a horizontal plane by utilizing a transit instrument. It involves measuring angles and distances from a known point to establish the location of other points. This technique is often employed in land surveying and construction to ensure accurate mapping and alignment of structures. By systematically recording these measurements, surveyors can create precise topographical maps or layouts for projects.
What does ipos mean in surveying?
In surveying, "IPOs" stands for "Initial Point of Survey." This refers to the starting point or reference point from which the survey measurements are taken. It marks the beginning of a survey project.
What is the difference between single plane method and double plane method?
single plane method:- let A and B be the two chosen instument station Q be the elevate object whose elevation is required A Band Q lies in the same vertical plane double plane method:- let A and B be the not in the same verticale plane as that of elevayed object Q they are in two vertical planes
What does HOT stand for in surveying terminology?
HOT stands for Horizontal Offset Target, a reference point used in surveying to calculate horizontal measurements and distances from a particular point or feature.
What geometric term best describes the surface of a desk Parallel?
Point
What is the name of the method of finding slope were you can actually count out the rise and the run between two point of the coordinate plane?
check google for answers
How long is it from Kansas to California?
It depends on the point at which you begin your travel in Kansas, and the point at which you end your travel in California, as well as your method of travel (car, bus, train, plane) and your speed of travel.
If point belongs to the plane?
Then it is in the plane!
What is formed by the intersection of a line and a plane if the line does not lie in the plane?
When a line intersects a plane and does not lie in the plane, the intersection forms a single point. This point is where the line crosses the plane. If the line is parallel to the plane, however, there will be no intersection point.
Is the point is a plane figure?
No. A point has no dimensions whereas plane figures have 2.
