1. Bar table
2. Rail
3. Bar die
4. Glass rack
5. Arm rest
6. Foot rest
7. Pick up station
from the book of "BAR AND BEVERAGE SERVICE"
by Lorenzo G. Rojo, MBA
FRONT BAR
If the Strut Bar is a GM Performance Parts Strut Bar then you have to purchase a set of end brackets. The same front strut bar can be mounted to the rear with a set of rear strut brackets. http://drcustomparts.com/HomePage.htm More info at w-body.com
as of i know the 3 parts of the bar are its up to you.
12 parts are in a fraction bar
Good info about raising front end by adjusting torsion bars.www.duramaxforum.com/forum/04-5-05-lly-performance-parts-discussion/4491-torsion-bar-adjustment.html
Inspect the front end for loose/worn parts such as the ball joints, tie rod ends, idler arm, pitman arm, center link, control arm bushings, wheel bearings, shocks, sway bar bushings, sway bar end links and steering box adjustment. Replace what parts you find worn and have the front end aligned.
Buy a t-bar for removing lug nuts at your local auto parts.
its te left siler bar in front of your handle bar. the right one is the front brakes.
2.5 Bar front 2.3 Bar rear ...when at low load 2.5 Bar Front 2.8 Bar rear ... At max. load
what are the parts of a cocktail?
I have a 2000 Buick Regal GS how do I change my front sway bar
2 Bar front 2.3 Bar rear. According to my owner's manual, it is 29psi (2.0 bar) for the front and 35psi (2.4 bar) for the rear with two passengers. For four or more passengers or four passengers with luggage it's 36psi (2.5 bar) front and 44psi (3.0 bar) for the rear.