How the packets that meet the test conditions will be handled by the Cisco IOS software
access-list 101 permit tcp any host 192.168.1.1 eq 80
Remove lines selectively when using named IP access lists Make subsequent additions at the end of the access list Every access list should have at least one permit statement
Computers permit easy access to large volumes of data?
you have access, anyone you permit and the government
Access-lists are used for limiting the traffic say mainly for security purpose. Using access-list you can deny or permit the traffic from source address based on standard access list or deny or permit the traffic by classification of source or destination ip address, or by protocols . these are written in sequential order. So order of statement is very important . We should be clear of what to permit or deny .. sample config Standard access-list Router(config)#access-list 5 <permit> or <deny> <source ip address> Extended access-list Router(config)#access-list 111 <permit> or <deny> <protocol> <source ip address> <destination ip address> After creating access-list it will not be useful without applying on the interface where the traffic runs along the path. these should be applied in inbound direction or outbound direction of the interface as per our requirement. Most importantly when u want make changes , copy to text editor or notepad , do changes on them and remove the access-list config in the router and copy them fresh from the notepad.
the answer is "People should be able to own a gun if they have a permit."
Extended
In telephony, an access code is a number that is dialed to permit the caller to use a particular telephone service such as a long-distance company.
IP addresses Telnet traffic Upper-layer IP protocols
It is a limit on the amount of data that any civilian may acquire at any point in time. The world government sets these limits for civilian users.If you would like to uncheck the box next to "Stay with in global bandwidth limit" You may apply for a permit at your local Post Office. The Post Men/Ladies are the ones that run the show, so dont't mess with them!Permits may cost you a pretty penny depending on the economy.2 day permit = $20.007 day permit = $99.95
the organization shall notify the contractor that work will be performed in a permit-required confined space and ensure the information is included in the statement of work (SOW) and brief the contractor on the contents of the space and known hazards that make the space permit-required
There really is no "port" for icmp but there is a icmp code. If you are looking for the icmp code for echo-reply it is 0 and the echo is 8 For an access list you could do the following: permit icmp any any echo-reply permit icmp any any echo Or the same using the icmp code permit icmp any any 0 permit icmp any any 8