You would need to specify where this sign is posted, on product notifications it refers to max weight allowed on that item at any one time.. e.g. ladders, chairs, children's electric motor toys.
Other examples of posted max limits may be on Commercial vehicles or Elevators.
For maximum power transfer, source resistance should match load resistance and source reactance should match load reactance with the opposite sign (so if the load is capacitive, the source should be inductive).
It indicates the maximum speed at which the tire can carry a load corresponding to it's load index.
That number refers to the maximum load rating(94) and the maximum speed rating (V)
the efficiency is maximum in a transformer when no load loss is equal to load loss.
It is always desirable to run any equipment or device at maximum efficiency for that matter, not only the power transformer. Power transformer maximum efficiency occurs when copper loss is equal to iron loss. (or no load loss equals to load loss). This does not necessariliy mean that maximum efficiency occurs at maximum or full load. Generally the maximum efficiency occurs at relatively less than full load of the transformer.
The maximum safe femur load, according to SAE is the allowable injury assessment value. The maximum femur load is 2250 lbs.
The load current must not exceed 30 amps. That's the safe limit.
An electricity board will be fixed some amount of load for consumer (industry or commercial) as per consumers requirement.That is maximum load or maximum demand.
Be sure your load is not wider that 12 feet 6 inches
200 amp maximum combined.
"full house load" Never heard that term. "Full Load" means a gun that had hold more than one round is fully loaded. "Full house load" could mean the maximum electrical load that can be carried by the current electrical system of a house or a similar contained unit.
maximum demand load can be calculated as: # maximum demand=demand factor * Connected load or by # maximum demand = connected load * Diversity Factor Note: Demand factor and diversity factor are NOT same