Double the area means half the resistance.
Resistance = resistivity times length / area. Resistivity is a property of the material only.
Increases
resistance is directly proportional to wire length and inversely proportional to wire cross-sectional area. In other words, If the wire length is doubled, the resistance is doubled too. If the wire diameter is doubled, the resistance will reduce to 1/4 of the original resistance.
When the voltage increases the temperature in the diode also increases. When the temperature in the diode increases, the resistance decreases.
Based on the simplest Electrical Equation V = I * R,(reads: voltage equals current multiplied by resistance)then, rearranged I = V / R .As resistance decreases, current flow proportionately increases
The answer to this depends on the material from which the resistance is made. For most materials resistance increases with increasing temperature. This is referred to as having a "positive temperature coefficient". Some materials have a negative temperature coefficient; these do have uses in electronics.
it increases
Other things being equal, a greater length will result in more resistance.
😉
Yes, the resistance is directly proportional to length of wire and inversely proportional Area, hence when Length of wire increases the resistance also increases and when Area increases the resistance decreases. This means a thick wire has least amount of Electrical resistance.
resistance increases
increase
Resistance is inversely proportional to cross-sectional area. so ,if the thickness of the wire increases, the area of cross-section increases and this results in decrease of the resistance. The resistance R = l p / A where R is the resistance, l is the length of the wire, p(rho) is the electrical resistivity of the material and A is the area of cross section. So R the resistance is inversely proportional to A the area of cross-section. If R increases
current decreases and resistance increases
the resistance can never increase or decrease....... (you can't open the resistor and take out the something and make the resistance increase or decrease)AnswerSince resistance is directly proportional to the length of a conductor, increasing the length of a wire will increase its resistance. For example, if you double its length, you will double its resistance.
nothing
increase
Resistance R =p(L /A)i,e Resistance(R) of a conductor will be directly proportional to its length(L) ==> if the length of the conductor increases its resistance also will increase.i,e Resistance(R) of a conductor is inversely proportional to its cross section area(A) ==> if the Area of the conductor increases its resistance also will decrease.