1.5189mm I think this answer have some deviation of the right one, gauge 16 equals 1.59 mm
1.59 mm http://www.mesteel.com/info/carbon/thickness.htm
STANDARD STEEL .9119 MM. GALV.STEEL 1.0058
.0781 inches1.98 mm
10 gauge: 3.57 mm11 gauge: 3.18 mm
26 GA. steel is 0.0179 inches thick.
16 mm
In Imperial standard (swg), 16 g is 0.064" (1.63mm) thick.
16 swg is 1.63 mm thick
The thickness of 16 gauge steel in US standards is .0625 inches or 1.59 mm and according to UK standards is .065 inches or 1.651 mm.
what is 9gauge in mm thickness
Low cost carbon steel caskets are usually made of 20-gauge steel. This means that 20 sheets of 20 ga steel have a thickness of one inch. Twenty-gauge steel sheets have a thickness of 0,8 mm; this is the same thickness as used in many automobile body panels. Standard steel caskets use 18 ga steel sheets which have a thickness of 1 mm. Upper end steel caskets use 16 ga steel sheets with a thickness of 1,3 mm. 16 sheets of 16 ga steel have a thickness of one inch.
1.27 mm (USG)
12 gauge is thicker than 14 gauge.
The strength, durability, and longevity of steel caskets depends first of all on the quality and thickness of the metal sheets used. The United States Standard Gauge for the thickness of metal sheets is based on the number of sheets required to total one inch. The gauge number (ga) informs about the thickness of the steel sheets in such a way that the lower the gauge number, the thicker the steel. Low cost carbon steel caskets are usually made of 20-gauge steel. (20 sheets of 20ga steel have a thickness of one inch.) Twenty gauge steel sheets have a thickness of 1/20" or 0,8 mm; this is the same thickness as used in many automobile body panels. More expensive steel Caskets are made from 18- and 16-gauge steel. 16 ga steel sheets have a thickness of 1/16" or 1,3 mm. 16 ga steel is twice as heavy as 20 ga steel, 140% stronger and has a 140% longer life than 20ga.
GAUGE , is one inch thick of steel or metal. So, take this one inch thick of steel sheet and cut it into 12 equal thickness sheets , you get a 12 gauge steel sheet. Similarly, take this one inch thick of steel sheet and cut it into 14 equal thickness sheets , you get a 14 gauge steel sheet. and so on . So, a 12 gauge steel sheet is thicker than 14 gauge , 14 is thicker than 16 , 16 is thicker than 18 and so on. Wrong!!! See my discussion on this...
the yield strength of Q345B is 345MPa for thicknesses <= 16 mm. 325MPa for 16 mm < thickness <= 35 mm. 295MPa for 35 mm < thickness <= 50 mm. 275MPa for 50 mm < thickness <= 100 mm.
the yield strength of Q345B is 345MPa for thicknesses <= 16 mm. 325MPa for 16 mm < thickness <= 35 mm. 295MPa for 35 mm < thickness <= 50 mm. 275MPa for 50 mm < thickness <= 100 mm.
The thickness of 24 gauge steel is 0.0250 inches or 0.635 mm (USG).