A reference dimension is a dimension that is not crucial for the effective use of the part. Reference dimensions are not inspected.
A reference dimension may also be a dimension that is shown elsewhere in the drawing but is shown in the current view to help clarify the position of other features in the view. This practice eliminates "double-dimensioning" which is not acceptable in drafting standards.
A reference dimension is typically indicated by placing parentheses around the dimension value and noting it as a reference dimension. The use of parentheses signifies that the dimension is for reference purposes only and is not intended for manufacturing or inspection. Additionally, a note may be added on the drawing to clarify the role of the reference dimension.
A reference dimension is commonly shown in paranthesis after the dimension i.e. 15'-0" (REF.)
A more common way, according to ANSI/ASME for mechanical drafting, is to simply put parenthesis AROUND the dimension itself [e.g. (Ø2.750)] This eliminates the need to understand the English abbreviation for "reference". The fewer words on a drawing, the better. Hence, the creation of all of the symbols that are used in drafting.
A component range drawing provides detailed information about the components, materials, dimensions, and tolerances required for a specific project or product. It serves as a visual reference for manufacturers to ensure that the components are produced accurately and according to specifications.
The placement of dimensions in a drawing is important because it helps to clearly and accurately communicate the size and location of features. Placing dimensions in a consistent and organized manner makes it easier for others to interpret the drawing and manufacture the part correctly. Improperly placed dimensions can lead to misinterpretation and errors in production.
The scale on a drawing represents the ratio of the size of the drawing to the actual size of the object. It must be considered to ensure accurate measurements and proportions in the drawing. Using the correct scale helps convey the information clearly and allows others to interpret the drawing accurately.
The theory of simultaneity, proposed by Albert Einstein's special theory of relativity, suggests that the concept of two events happening simultaneously is relative and dependent on the observer's frame of reference. In other words, what one observer perceives as happening simultaneously may not be perceived the same way by another observer in a different frame of reference. This challenges the classical notion of absolute simultaneity and adds a new dimension to our understanding of time and space.
Tools refer to the physical instruments used to create a drawing, such as pencils, erasers, and rulers. Materials, on the other hand, refer to any substances or surfaces that are used in the drawing process, such as paper, canvas, or pastels. While tools are what you use to create the artwork, materials are what you use the tools on.
No, then it would not be a reference dimension. Reference dimensions by definition have no tolerance.
.125 STOCK
It means you can't look at it or you'll go catatonic Cute. Actually, it means that the entity that is being "referenced", usually a dimension, should NOT be inspected. It might be an overall length of the part. This might be a "cut length" for the machinist where the actual required dimension is shown elsewhere on the drawing.
Every dimension has a shown or implied tolerance, the dimensions shown as HOLD are the dimensions that are not to be affected by the stack up of tolerances of the holes or features around them.
The first dimension string on an architectural drawing should begin at the point representing the starting reference point of the dimension being measured. This point is typically indicated by a small arrow or dot.
This is a reference dimension. I.e. the part can and should be manufactured without using it directly. The non-bracketed dimensions should define the form of the part completely.
Shown in drawing and shown on drawing can mean the same thing. These statements would both indicate that the concept is shown somewhere within the drawing.
A dimension that exactly locates a reference point, reference line, or reference plane
Generally it means that the dimension is for reference only. The actual (real dimension) will show up somewhere else on a drawing. It could also be put on a dimension that you really don't want an inspector to hold tight (material thicknesses that vary with vendor or batch run)
An underline on a dimension means that it is not to scale.
NTS
Basic dimension is the numerical value defining the theoretically exact size of a feature. Reference dimension is the numerical value enclosed in parentheses provided for information only and is not used in the fabrication of the part.