DC transmission lines are only used in special applications for example very long distances or for connecting two non-synchronous power systems. As an example UK and France are connected by DC power cables because the two power systems are not synchronised.
just the power they carry, the lines are the same
The main advantage of ac- it required less maintainance The main disadvantage of ac-it can not be stored the main advantage of dc -it required less amount of conductors to transmit and easily stored The main disadvantage of dc-it is more dangerous than ac at high voltage
AC is used for transmission because AC can be stepped up in voltage with a transformer, and then stepped back down at the destination. Since power is voltage times current, a higher voltage requires a smaller current to achieve the same power. Since the current carrying capacity of wires is based on wire size, a smaller wire size can be used to transmit the lower current.
letters of the alphabet
The main advantage of using ac is that you can step up and step down the voltage by means of a transformer,since transformer works only with ac. another thing is that if dc power is used for transmission,then the power loss associated with t will demand the use of transmission lines which are very thick(have a larger cross section)..for long distance transmission this may lead to the requirement of power lines with impractical dimensions.
They use both. AC is almost universally used because it is easy to convert it to different voltages by step up or down transformers. Over very long distances and in special circumstances DC is used because AC has higher losses. The phase synchronization with other power grids as well as the frequency is also a problem with AC. A common example is where 50 Hz and 60 Hz power systems share resources.
You don't! That's the whole point of a d.c. transmission line.
AC transmission lines are 3-phase, DC transmission lines don't have phases. It doesn't matter where they are from.
alternating current is generally instantaneous in nature and even in transmission lines it is easy to transmit with less losses when compared to dc as because it possess frequency where as dc do not have
The power transmission would require bigger wires to transmit high dc current so instead high voltage ac current is transmitted through long distance linesTo reduce losses it is necessary for the value of current through lines to be lowTranformers donot work for dc current so one cant step up and step down dc current voltage like it can be done with ac current
The main advantage of ac- it required less maintainance The main disadvantage of ac-it can not be stored the main advantage of dc -it required less amount of conductors to transmit and easily stored The main disadvantage of dc-it is more dangerous than ac at high voltage
AC is used for transmission because AC can be stepped up in voltage with a transformer, and then stepped back down at the destination. Since power is voltage times current, a higher voltage requires a smaller current to achieve the same power. Since the current carrying capacity of wires is based on wire size, a smaller wire size can be used to transmit the lower current.
No. You would need the transmission, wiring, fuel lines, computers, ac lines, and radiator hoses for a 2.4L.
An AC transmission line is typically a set of three wires that transports electricity over great distances at potentials exceeding 115,000 Volts. A common intrastate transmission line voltage is 230,000 Volts (230 kV), and interstate lines are normally rated 500,000 Volts (500 kV). When it is desired to transport electricity to a non synchronized area -- like Texas, DC transmission lines are used instead.
Although N. Tesla invented many things, probably the most important invention was the alternating current (AC) motor. This allowed the world to use AC generating and transmission lines to transmit electricity over great distances with little power loss. Direct current cannot be generated or transmitted over long distances without great losses due to resistance.
ac transmission is better. because it is cheaper as converter are not use.but losses are more as comparison to dc.
Transmission towers are usually made of steel to help support over the head power lines. They are used in high voltage AC and DC systems and can come in different shapes and sizes.
The main advantage of using ac is that you can step up and step down the voltage by means of a transformer,since transformer works only with ac. another thing is that if dc power is used for transmission,then the power loss associated with t will demand the use of transmission lines which are very thick(have a larger cross section)..for long distance transmission this may lead to the requirement of power lines with impractical dimensions.