If you connect a device like a LED or a speaker in series, that means that you connect the positive terminal of one speaker/LED to the negative terminal of the other speaker/LED and apply the audio/voltage to the remaining positive and negative terminals. When you connect devices this way, that means that both of the speakers/LEDs are getting the exact same current, but different voltages depending on the position in the parallel circuit.
If you connect a device in parallel, then that means that the device's positive and negative terminals are connected to the other device's positive and negative terminals, and then voltage is applied to the positive and negative terminals of the devices respectively. This means that the devices are getting the same voltage but the current varies and is highest at the positive connection and lowest at the negative connection. (The voltage that each device is getting is determined quite easily by doing the sum 'input voltage / number of devices'.)
Series clipper diodes are in series connection with the load while Parallel clippers are in parallel connection with the load.
constant electrical quantity-series connection -current constant electrical quantity-parallel connection - voltage
A series connection will not work if one bulb fuses but in a parallel connection if one bulb fuses the rest will stay lit.
series connection
In series connection current will be same. in parrel connection voltage will be same and current wil be varying
only two connections are possible.. parallel connection is always desired than series. .
Characteristics of parallel connection.
Yes, series and parallel connection of batteries is possible. When connected in series Voltage increases. In parallel, Current increases but voltage is constant.
Parallel. Coz all the elements will get same voltages from the sources. in case of series connection, the voltage is divided between all elements.
if you connect the pumps in series, it will add head at the same flow rate. Inversely, in parallel connection, double the flow rate at same head.
1.In series connection the total resistance is equal the total number of resistor that was connected in series 2.the current is constant in a series connection 3.in a series connection total voltage is equal the number of of volt per cells
In the series connection and how there is multiple paths or branches on parallel circuits but in a simple circuit, there is one path.