A Sag Template is a very important tool with the help of which the position of towers on the Profile is decided so that they conform to the limitations of vertical and wind loads on any particular tower, and minimum clearances, required to be maintained between the line conductor to ground, telephone lines, buildings, streets, navigable canals,power lines, or any other object coming under or near the line.
-The tension of the cable (the tighter, the less sag, but this can cause other problems if too tight) -The temperature outside (the higher the temperature, the more it will sag) -The amount of current flowing through the cable (the more current, the hotter the conductor will get = more sag) -The type of cable (aluminimum will sag more than copper; ACSR will sag less than straight aluminimum).
i know someones going to be on this sooooooooo....... they sag because the hydro workers know, from the heat the cbles will sag during the summer, so they start the sag so they cant sag anymore
The plural of sag is sags, not sag's! Sag is caused by the weight of the conductor between its supports, and is (a) unavoidable and (b) necessary to allow for the conductor's expansion and contraction during variations in temperature. When surveyors design a power line, the amount of necessary sag is calculated and built into the design, while ensuring that the clearance between the conductor and the ground remains within safe limits.
The only reason to overload a template function is to provide an overload that differs in the number and type of arguments that cannot be addressed by the template function alone. You simply declare them as you would any other overload. The overloads may themselves be template functions, but there must be no ambiguity: every template function must generate an unique function signature. Remember that template functions generate overloads at compile time on an as-required basis.
No, because C does not support the concept of template functions. Template functions only exist in C++, never in C.
plot of conductor sag and span lengths
sag
SAG
The past tense of sag is sagged.
The sag setting is necessary because it is physically impossible to have a suspended line with no sag. The sag is specified because there has to be a minimum clearance value for the height above ground at the centre of the sag where the cable is at its minimum height.
Sag lasers measure distance.
Ivan Sag was born in 1949.
Not according to the SAG website. Yes they are according to the SAG Website....
The address of the Sag Harbor Whaling Museum is: 200 Main St, Sag Harbor, NY 11963
The address of the Sag Harbor Historical Society is: Po Box 1709, Sag Harbor, NY 11963-0062
The address of the Serve Sag Harbor Inc is: Po Box 775, Sag Harbor, NY 11963-0019
You can get a SAG membership card upon appearing in a film, and applying for the card. SAG cards can also be awarded to extras, and once dues are paid, the SAG card will be given.