Striping is the automated process of writing data across multiple drives simulteneously. Striping is used to increase the performance of disk reads. When using striping, if you write a 5GB file across 5 drives, 1GB of data is written to each drive. Parallel reading of data from multiple disks can have a significant positive impact on performance, because the physical disk drive is most often the performance bottleneck. Striping is used in RAID Level 0. If one drive in a striped set fails, all of the data in the stripe set is lost. The data must be restored from backup. Because of this, striping is often combined with the use of parity (RAID 5) or mirroring
a hard drive failure is when your hard drive stops working...
a hard drive is called "disque dur" in French.
* Hard disk drive * Hard drive * HDD
If the Hard drive is IDE (40 pins on the back) you would configure the primary hard drive as Master and secondary hard drive as Slave using the jumpers on the back of the hard drive.
It is the same as a laptop hard drive
No. IDE Hard Drive cannot be replaced with a Sata Hard Drive because the connectors are different. example. if you have sata hard drive installed on your machine. and you purchase IDE Hard drive. you won't be able to install the IDE hard drive where the Sata hard drive was because the IDE connectors are a different shape and size towards the Sata hard drive connectors.
To start, the hard drive cable connects your hard drive to your motherboard. Its really simple.
Hard Disk Drive.
You get another memory storage device, such as an external hard drive, and you copy everything on your hard drive onto the external hard drive, and keep it safe. That way, if your hard drive crashes, then you can take it out, and plug your external hard drive in, and work from that.
It upgrades your hard drive
Hard Drive E
A portable hard drive is both of the following:a hard disk drive that is small enough to carry (portable)a hard disk drive that is external to a computer