It would depend on where you purchase the concrete, and the brand you purchase, and whether you pour the floor yourself or have it done and pay labor.
around $2.50 (exterior)-$3.50 (interior)
The Average construction cost for industrial building is as follows for year 2013 Basement 1100 per sq ft. Ground floor 900 per sq ft. F.F and above 850 per sq ft. Regards Gaurav Chadha
An IPS(Indian Patent Stone) Floor, is generally used over terraces in general, to achieve an economical and water sloping finish with a decent monolithic appearance.... However the IPS finish may even be used for other interior and semi-interior areas as the need may be, but in areas, where required structural strength by a floor would be more eg. Car Parks, Workshops and Driveways, a similar kind of a multi-layered flooring using lean concrete in a different proportion altogether may be utilised......Unlike IPS, a VDF floor calls for a more skilled labour with almost twice as many man hours over the same stretch..... This system raises the cost as there is machinery required, but appearance wise and strength wise the VDF (Vacuum Dewatered Floor) floor stands out...... The VDF is generally done with a base layer of lean concrete with suitable expansion joints executed with rubber or steel strips... Then a screed vibrator is run over the surface, supported on channel shuttering spaced 4.0 meters apart. The screed vibrator is run twice to achieve optimum compaction & leveling. After this a system of lower mats & top mat is laid on the green concrete & this is attached to a vacuum pump. This draws out excess water.
For repetitive tasks which use the same path things like following one on the floor of a factory to remove the need for a human operator also lines of metal placed under lawns can be used as a guide for a robot lawnmower
A factory layout is a schematic that shows all the internal parts of the structure that make up the entire factory. This is integral to a factory's production due to being able to determine or create the areas where people, materials, equipment and everything will be in and out.
mujhe pata nahi hai ki kya hai yeh integral floor finishes.
Average price to scrub warehouse for with degreaser for double scrubbing would be approximately 18-22 cents per square foot
A finished concrete floor is generally less expensive than a slate or stone floor. A simple professionally poured concrete floor can average about $5.00 a square meter. An installed slate floor costs considerably more that concrete depending on the tile you choose and installation costs. Slate flooring is more expensive than concrete. Stamped concrete is also an option that looks nice but it is still less than slate.
using epoxy paint to do a concrete floor need to know how much square feet it is how do i calculate the square footage?
how may yards of concrete are needed for a floor 24 x 25 feet?
90
7.50/square foot
Radiant flooring is an option if one has an existing concrete floor. The radiant flooring system is installed underneath the concrete floor to heat the concrete.
The carpet and pad are insulating you from the concrete floor.
Most of the home Centers have shifted from sealing to Honing & polisging the concrete, smooth, easy to clean, no dusting and looks a lot like terrazzo
Yes, you can stain a concrete slab. It is a several step process and costs about $.50 a square foot to do it yourself. See attached link for process.
To test a concrete floor for sufficient dryness before painting you should tape a two foot by two foot square of (clear) plastic film to the floor, wait 48 hours and see if the concrete is darker under the plastic or if any condensation has occurred on the underside of the plastic. If so then the floor is not dry enough. If no condensation or darkness, paint.
a good range is $1 - $1.25 a sf, lower if you have large quantities.