Want this question answered?
Another name for integral proteins is integral membrane proteins.Most are transmembrane proteins, which span the entire depth of the membrane.
For a rectangular wing, this reduces to the ratio of the span to the chord length as shown at the upper right of the figure. High aspect ratio wings have long spans (like high performance gliders), while low aspect ratio wings have either short spans (like the F-16 fighter) or thick chords (like the Space Shuttle).
Aspect ratio is the ratio of wingspan to chord (front to back of the wing). Alternatively it can be found by (span x span)/ (wing area).
the ratio of wing span to the chord of the aerofoil is ASPECT RATIO
I would just get it installed so you know it is done right but they have a graph to help you here http://www.raisedfloorliving.com/floorframing.shtml
The span to depth ratio is in place preliminary as a method of ensuring deflections falls within certain limits. As concrete is a multi-phase material and does not behave linearly, it is often complex to calculate expected accurate deflections. codes set out given span/depth ratios as a simpler method or ensuring deflections remain in given limits. These ratios have been derived empirically from testing. The compressive strength of concrete as a material does not vary with varying span/depth. However, the amount of the concrete section which is in compression will vary with span and depth due to changes in the applied moment and increase/reduction of the internal lever arm.
d. 3 and 7
Spick-and-span is another way of saying that something is very clean.
Its depends on location and type of towers. Supposed the transmission line is erected at hill area and second line is erected in desert area and third one in forest area. Then the allowable value of weight span and wind span ratio in transmission line will different. Also this ratio will depends on types of tower . Like the value is different in 132KV, 220KV , 400KV and 765KV.
The average human body height to arm span ratio is approximately one to one. The arm to body ratio in a human is two to one.
the ratio of Length of span / width of span = >2 or <2 Or where span of Slab is with in 3.6 m it is one way slab, and where span is more than 3.6 m it is two way slan.
The sag ratio relates to suspension bridges. For cable-stayed bridges we talk about span ratio. They are the same thing but they're called differently simply because the cable of a suspension bridge sags. The sag (or span ratio) is the ratio between the total distance c/c (center to center) between the pylons and the height of the pylons from the deck to the top. Usually for suspension bridges the sag ratio is 1:9 or 1:10 for better aesthetic results.