If only one network address is available on a host, all transport connections on that machine have to use it. When a TPDU comes in, some way is needed to tell which process to give it to. This situation, called upward multiplexing. While if a user needs more bandwidth than one virtual circuit can provide, a way out is to open multiple network connections and distribute the traffic among them on a round-robin basis. This modus operandi is called downward multiplexing.
upward and downward ultiplexing
Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.Multiplexing allows several users to share a single connection. For example, several computers at my home share a single ADSL line, to connect to Internet.
direct connection (EDI) requires each business in the network to operate its own on-site EDI translator computer. Most companies use the service of a value-added network such as VANs that provides communications equipments, software, and skills needed to receive, store, and forward electronic messages that contain EDI transactions set. the main difference is that indirect connection pass message through the VANs instead of connecting their computers directly to each other.
Expert systems are ones that are used to keep the business running. The executive ones will be used by those in charge when needed.
A cool temperature is needed.
Is a crossover cable needed to connect Host computers to the switch? Why or why not?
lee smell like poo ;)
multiplexing refeers to the transmission of different signals in the same channel simultaneously. There are many forms of multiplexing that can be used, including frequency division multiplexing(FDM) where individual signals are transmitted over adjacent , non overlapping frequency bands. they are transmitted in parallel and simultaneously in time. In time division multiplexing(TDM) each signal is allowd to use the whole bandwidth for a certain period of time. Multiplexing is needed so that the available channel can be used efficiently and also to save costs. There is too much to know about multiplexing, here is just a short overview. One thing that one has to know is multiple access.
The difference between need and needs is simple. A need is a singular thing that is needed. Needs is when there is more than one thing that is needed.
profit or loss
essential-needed to survive luxury-wanted
An implement is a tool or utensil that is needed perform a task. Equipment can be the tools or supplies needed for a task.
modulation means transmitting the signal which is to be transmitted along with the carrier wave, then at the receiver it is separated from the carrier and demodulated. So modulation is needed so as to transmit the signal over long distances with higher accuracy. Hence it is required before multiplexing.
No matter how much force you exert downward, it shall avail you naught. No downward force acting directly on the object can ever succeed in lifting it.
More information is needed as to what a "3 way LBS" is.
A surplus is more than needed, a deficit is a shortage or loss
the political are political thats all that is needed.
There is a very big difference between president and acting president. The president is the leader full-time and the acting president just steps in when needed.