It will be at least 117,000 psi and as high as 290,000 psi - the range depends on the tempering temperature and heat treat
YIELD STRENGTH 242 N/sqmm TENSILE STRENGTH 440~520 N/sqmm
high tensile stainless steel
There are thousands grades of low carbon steel in the world. The properties (tensile strength) depends of a lot of parameters such as product type, heat treatment, micro-alloying, dimensions of products, etc. Max possible tensile strength for low carbon steel is 1200 - 1400 MPa.
High tensile steel put simply is used where structures require high tensile strength. Tensile stress is where the forces on a material are "pulling" from each end away from the centre. Steel can be alloyed with certain materials such as aluminum to create a material that is stronger under tensile loading. An example of where high tensile steel is required is the cables of the ANZAC bridge that support its deck. Hope this helps..
EN8 is an unalloyed medium carbon steel with good tensile strength. It is normally supplied in cold drawn or as rolled. Tensile properties can vary but are usually between 500-800 N/mm2
You mean tensile strength. Different steels have different tensile strengths. The way they are made (drawn, cast, forged, etc.) is critically important to the tensile strength. By the way--steel is more important for its stiffness than its tensile strength.
You mean tensile strength. Different steels have different tensile strengths. The way they are made (drawn, cast, forged, etc.) is critically important to the tensile strength. By the way--steel is more important for its stiffness than its tensile strength.
A tensile rod in a mechanism is made from AISI 4140 OQT 1300 steel. It has a rectangular cross section , 30mm*20mm & a length of 700mm.It is to be
High tensile steel is strong steel. It is 10 times stronger than wood and more than twice the tensile strength of mild steel. High tensile steel is commonly used in highway guardrails.
cars
YIELD STRENGTH 242 N/sqmm TENSILE STRENGTH 440~520 N/sqmm
high tensile stainless steel
275 MPa
.08KN/mm2
according to ASTM A36 Marine grade mild steel plate has a tensile strength of 58 - 80 thousand psi.
yep it is. It has much more tensile strength then steel.
yield is the breaking point and tensile strength is what it is rated at per square inch