According to iSymphony customer service, they advised to try all of the available Samsung codes for the remote you are trying to program.
i have a isymphony tv & need a code 2 programe my bigmatters jumbo remote can you help me with codes.
Device codes on televisions are used for communications between the television and the remote control. The codes are used to setup and change channels.
The SC-PT75 doesn't have a programmable remote control itself. In order to know what codes to recommend to control this product, We need to know which remote control from which device you are using. Every manufacturer has a different code system to program their universal remotes.
remote control codes for samsung blue-ray on time warner cable remote control
codes for universal remote control for aristona dvd player
what are the codes for a 47LG50 remote control to program DVD,VCR,Comcast
What are the codes for jumbo remote
0178
AT&T U-verse remote control codes for INSIGNIA HDTVs (mine is a NS-24E730A12 and I have a black remote control) are: 1034, 1035, 1040, 1398, & 1465.
InstructionsAutomatic Code Search1 Turn on the first device you want to program to the Gemstar remote control.2 Hold down the button you want to program, for example "DVD," while holding the "ON/OFF" button until the red indicator light comes on. The remote control is now in programming mode.3 Point the Gemstar remote control at the device and press the "Play" button. The indicator light will blink for approximately five seconds as it searches the first group of codes.4 Press the "Play" button after the indicator light stops blinking to check the first group of codes. Continue doing this until the device powers down.5 Push the "Reverse" button and wait approximately 2 seconds. Continue doing this until the device turns on again.6 Save the code setting by pressing and holding the "Stop" button until the indicator light stops blinking.7 Repeat Steps 1 to 6 for each device you want to program to the Gemstar remote control.Direct Code Input8 Review the last page of the RCA Gemstar remote control user manual. This page has a list of device manufacturers. Look up your device's manufacturer to find the remote codes for your device.9 Turn on the device you want to program to the remote control.10 Press and hold the button you want to program, such as "SAT/CABLE," and use the keypad on the remote control to enter the first code from the list.11 Release the button you want to program and press the "ON/OFF" button to see if the programmed code worked. The device should shut off if the code was successful.12 Repeat Steps 3 and 4 with the next code on the list until you find a code that operates the device.13 Program the rest of the devices you want controlled by the Gemstar universal remote control by repeating Steps 1 to 5.
A universal remote control works by allowing codes to be entered for your electronic equipment so it can be operated by this remote. It offers codes to be entered so it is interchangeable with many different brands.
No, the dish network remote only has those codes. If you want to control everything, get a Logitech Harmony remote.