Reactance increase means the value of the inductance is already increased because thease two factors are directly proportional to eachother. we can see from the formula ; inductive reactance xL =2(3.14)FL
Reactance is measured in ohms. By convention inductance produces a positive reactance while capacitance has a negative reatance. This is a convention that is consistent with a time-dependecy of exp(+jwt).
Inductive reactance, XL, in ohms, is given by:XL = 2 pi f Lwhere:f = frequency (Hz)L = inductance (H)
The capacitive reactance of a capacitor increases as the frequency decreases.
increase inductance
for inductor, reactance XL = 2*pi* f *L, if frequency doubles then reactance increase. But for capacitor, reactance Xc = 1/(2*pi*f*C). In this case if frequency doubles the reactance decrease.
Inductive reactance case of ac) is equivalent to resistance (in case of dc) for inductors.So if resistance increases current decreasesas well as if inductive reactance increases current decreases
Inductive reactance, as well as capacitive reactance, is measured in ohms.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
There is no such term as 'inductance reactance'; the correct term is 'inductive reactance'. This is the opposition to the flow of a.c. current, due to the inductance of the load, and the frequency of the supply, and is measured in ohms.Inductive reactance is directly proportional to both the supply frequency and the load's inductance.
The voltage across the inductance alone will be(value of the inductance) times (the rate at which the current through it changes)
0.2512 OHMS
Reactance is measured in ohms. By convention inductance produces a positive reactance while capacitance has a negative reatance. This is a convention that is consistent with a time-dependecy of exp(+jwt).
Synchronous Reactance (in a generator analysis domain) is and equivalent series per-phase inductance term (think per-phase winding resistance) and is mainly composed of the machine's per-phase leakage inductance (equivalent series inductance of primary and secondary flux leakage) and armature reaction (distortion in flux introduced by an armature current in a machine, once again on a per-phase basis; described as a series inductance). L_SyncReac=L_leakage+L_ArmatureReaction. That sort of touches the surface of synchronous reactance.
Inductive reactance, XL, in ohms, is given by:XL = 2 pi f Lwhere:f = frequency (Hz)L = inductance (H)
actually, inductance is directly proptional to the frequency according to the formula , so if frequency is more, then inductance is also more and vice versa
Yes, but you need to convert inductance and capacitance to reactance.
Reactance is a result of inductance. Inductance is a result of a changing magnetic flux cutting a wire or let say, a coil, or, a result of a moving conductor cutting a magnetic field. DC motors are inductors i.e they have reactance. This happen as soon as the armature starts rotating. The armature is moving in the magnetic field of the field windings thus an emf is induced in them as the armature conductors start cutting the field. It's this emf that limits the armature current once the motor is in motion.