0.2512 OHMS
The reactance of an inductor is calculated as Xl = 2πfL, where Xl is the inductive reactance, f is the frequency, and L is the inductance. Substituting the given values of 100 microhenries for inductance and 400 Hz for frequency into the formula gives Xl = 2 * π * 400 * 100 * 10^-6 which equals approximately 251.3 ohms.
The secondary voltage in a transformer is stepped up by having more turns in the secondary coil compared to the primary coil. This creates a higher electromagnetic induction which leads to a higher output voltage. The ratio of the number of turns in the primary coil to the number of turns in the secondary coil determines the degree of voltage stepping up.
A compound generator is a type of generator that has both series and shunt field windings. The series winding adds to the main field flux, providing good starting torque and limiting voltage droop under load. The shunt winding ensures stable voltage regulation at normal load conditions by adjusting the generator terminal voltage. This combination of windings allows the generator to provide stable output voltage across a wide range of loads.
Regularly clean up after yourself by disposing of trash properly. Use reusable products to reduce waste. Organize and declutter your living and work spaces regularly. Encourage others to be mindful of their own cleanliness habits.
A coil has both resistance and inductance. When you apply a d.c. voltage, the opposition to current is the resistance of the coil. When you apply an a.c. voltage, the opposition to current is impedance -the vector-sum of the coil's resistance and its inductive reactance. Inductive reactance is proportional to the inductance of the coil and the frequency of the supply.
increase inductance
Type your answer here... By use an inductance meter or an inductance bridge
It is used to measure the inductance of a coil of unknown inductance.
what factors on inductance drepends
Reactance is a result of inductance. Inductance is a result of a changing magnetic flux cutting a wire or let say, a coil, or, a result of a moving conductor cutting a magnetic field. DC motors are inductors i.e they have reactance. This happen as soon as the armature starts rotating. The armature is moving in the magnetic field of the field windings thus an emf is induced in them as the armature conductors start cutting the field. It's this emf that limits the armature current once the motor is in motion.
Inductance
Which magnet is use to create maximum inductance in coil?Read more: Which_magnet_is_use_to_create_maximum_inductance_in_coil
Mutual inductance describes the process by which a changing current in one coil, creates a changing magnetic flux which, when it links with a second coil, induces a changing voltage into that coil.
The inductance of a coil is not related in any simple way to the length of the wire or other conductor of which it is wound. The inductance is at least as heavily influenced by the diameter of the coil.
Since a coil contains numerous loops, more of the conductor is affectedÊ by the magnetic field. An increase in permeability of the core results in an increase in the inductance of the coil.
The coil consists of inductance. Due to inductance the current lags the voltage. So, the power factor is lagging.