the port is disabled
Set VTP revision number to a smaller number
vty 0
Switch(config)# ip default-gateway 192.168.1.254Switch(config)# interface vlan 1Switch(config-if)# ip address 192.168.1.1 255.255.255.0Switch(config-if)# interface fa0/1Switch(config-if)# switchport access vlan 1
4. Set the switch priority to a smaller value than that of the other switches in the network.
This allows web-based configuration tools to be used with the switch.
This allows web-based configuration tools to be used with the switch.
Yes, you if you printer has network interface (NIC). u can connect them through routers or switch
I guess you are talking about a network switch. You would need a NIC, Network Interface Card, and a cable.
Flood the network w/ broadcast
Link light
Privileged mode (will turn into a # sign after the router name instead of the > sign it has upon startup.
switch straight cables NIC's - Network Interface Card (for windows) choose "setup a home or small office network" from network connections window assign IP addresses for the PC's