The OBD 2 plug is located under the dash on the driver side.
You need a code reader or a scan tool.
You need a scan tool or code reader to get the codes.
A scan tool or code reader is required after repairing the cause of the code.
Reading diagnostic codes is easy. The driver plugs the reader/scanner into the diagnostic port of the vehicle, and the scanner/reader will give a code if there is a problem, and tell them the type of problem.
An OBD2 car diagnostic reader is used to diagnose any problems that a car might have and it saves time and money. For example, if there is an engine check light on, the OBD2 car diagnostic reader can tell what is the problem so it can be fixed as soon as possible.
In the dashboard under the radio slightly to the right!
It's a box under your hood labeled diagnostic.
It is under the dash on the driver side.
Obd-on board diagnostic. The port is the plug the scan tool or code reader connects to.
Amazon has a variety of diagnostic tools for cars. The Actron CP99550 OBD-II Pocket Scan Plus Diagnostic Code Reader is reasonably priced (71 dollars) and gets 4.5 stars for a rating.
A 1995 is OBD1 not 2. The plug is the rectangular plug under the dash on the driver side. It is not the same style plug as an OBD2 plug.
bookmark