On lower left side of engine, behind the water pump, it is a hex headed bolt.
17 mm.
In order to change the motor oil on a Honda XRM 125 you need to lift the bike on a motorcycle rack. You then need to unscrew the drain plug, let the oil drain out, put the drain plug back in, change the oil and put new oil in.
There is no drain plug.
No
NGK
There is no fuel tank drain plug.
It's in the radiator drain plug hole.
Same thing.
The engine ser.# is on the lower l/h side of the crankcase above the oil drain plug.
To drain the cooling system on a 1985 vt500c. Take the drain screw out of the water pump. It looks like one of the cover screws but the one on the bottom is the drain. hope this helps.
Find something to contain the engine oil Put it under the bikes oil drain plug Remove the oil drain plug Remove the oil filter Lightly coat the O-ring of the NEW oil filter with clean oil Install the new oil filter Once the oil coming from the bike has slowed to a drip replace the oil drain plug fill with the recommended amount and type of engine oil you are done.
2006 honda odyssey engine oil drain plug torque