Copper, Brass, Yellow Brass , Red Brass, Galvainzed steel, Galvanized wrought , Yalloy
Copper has several redeeming qualities. It last long, does not rust, and won't grow bacteria. It also does not interact with water, making it good for pipes.
to make sure no unsterilised water or faeces det through cracks in sewer pipes
copper
high and low
On the inside? Your only hope is just flushing the system; find one ball valve, sweat or threaded, with a hose cap on the bottom. Attach a garden hose to it. Find another one, preferably as far from the first as possible. Make sure both valves are open, and run the water. Make sure the supply valves are shut, though, or you'll just have more of a mess than necessary. Seeing as they are not AC/R pipes, you shouldn't have to replace anything liquid wise. Note: I'm a steam fitter, so I might be wrong. Not sure of what type valves plumbing pipes use. On the outside, just sand it with the same grit sand paper you'd normally use to prepare it for soldering. Hope this helps.
Take an cardboard then make 3to4 houses and stick it to different places then take a thick paper and rool it tightly for pipes
We usually don't find nickel pipes, as in pipes made of nickel metal. We do find that nickel is added to other metal(s) to make an alloy that can be used to make different kinds of pipe. Nickel is added to steel alloys to make different kinds of steel pipe, and these pipes find use in a variety of applications.
Copper is easily worked and joined, it is inert to most potential contaminants and trace impurities in mains water, it is non-toxic, it is moderately cheap
Pure copper is too soft to be any use so an alloy of copper and iron (or a similar metal) would be used.
sodium and water often make babies. you dont want your water and your sodium making pipes, do you?
Copper was good, mainly because it doesn't rust. Now there many pipes in plastics such as PEX, which are infinitely better than copper. Nobody smart uses copper any more.
platinum, gold, brass, acrylic, plastic, solder, and lots more. alloys that don't react with water are sequins, brass, steel, pewter and also many more.
if the pipes are warm or hot at the time the coldwater passes though them, it can cause the pipes to cool and contract
they get big long pipes and walk to the sea so they can join the pipes and make a water sucking tunnel.
You should always check for pipes by hand, many pipes are PVC and will not show up on a metal detector.
Water expands when it freezes. If water pipes are allowed to freeze then the pressure of the expanding ice inside them will fracture the pipes. Then when the temperature rises so that the ice melts, the pipes will leak - with resulting damage.
BECAUSE ITS EXPENSIVE IDIOT. Unless someone is super rich and wants to make pipes out of gold for the most stupidest reason, that's the only way it will be used. But why the hell would you want to WASTE gold like that??? Water pipes are hidden so theres no point in using such a beautiful mineral. Try another metal that doesn't rust other than gold -.-