More than likely the ballast in the fixture has failed.
You should have your rotors checked and possibly turned or replaced as necessary You should have your rotors checked and possibly turned or replaced as necessary
The timing or crankcase sensor needs to be checked and most likely replaced.
I would definitely get it checked.
The sensor may be defective/broken. I would have that checked or replaced.
If a washer pump was replaced on a Jeep Wrangler and is still not working the fuses should be checked. The washer switch should also be checked as it could also be causing the pump not to work.
Was the gasket replaced? Have you checked the hose and the heater core. Is everything tightened down?
Get a new vet....
battery need to be at lease 14 volts to be able to start
Break pads should be checked if not replaced. Check condition of rotors at the same time.
I have tried removing temps....checked the firewall.....no use still not going
Have your brake system checked immediately! (by a proffesional)
Hey Hatim==Take it to Aauto Zone and have it checked out GoodluckJoe Take it to Auto Zone and have it checked out.