if elec-poss blown fuse, wires wired wrong, foulty fuel pump, hoses wrong way around, blocked fuel lines, blocked fuel filter mechanical- missing drive rod from cam, fuels lines wrong way around, foulty pump, blocked fuel lines, filters, could be something eles making it not start
It is unnecessary to bleed the lines after installing a new fuel pump. The fuel pump will pump all the air out of the fuel lines and start to work properly without any bleeding. Just install a new fuel pump and start the engine.
How do you get to the fuel pump
# remove fuel from gas tank # remove fuel tank (all vent , fill, fuel lines and electric lines have to be removed before removing tank) # remove fuel pump from top of tank # install new fuel pump # replace tank and fill # check for leaks
Disconnect the fuel pump, run the engine until it stops. After that remove the filter. Install new one. Connect the pump. Start the engine and check for leaks.
97 dodge intrepid, new fuel pump, won't start
You will need to remove the fuel pump wiring harness. Remove the fuel pump fuel lines. Remove the fuel pump retaining bolts. Reverse the process to install the new fuel pump.
Begin by removing the fuel pump wiring harness. Remove the fuel pump lines. Remove the fuel pump retaining bolts. Reverse the process to install your new fuel pump.
Problem other then Fuel Pump
Drain the fuel from the fuel tank. Remove the fuel line. Remove the fuel pump retaining plate. Remove the retaining plate from the fuel pump. Reverse the process to install the new fuel pump.
Drop the fuel tank, remove the old fuel pump from the top of the tank, install the new fuel pump and put the tank back.
You will have to drop the fuel tank. Remove the pump assembly. The new pump should have instructions for replacing the unit.
Drain the fuel from your fuel tank. Remove the fuel pump retaining plate. Remove the fuel pump retaining bolts. Remove the wiring harness from the fuel pump. Reverse the process to install the new fuel pump.