0
Why does my Rover 25 fan heater only works on 3 and 4 but does not work on the lower speeds?
Wiki User
∙ 15y ago
The stage 1 relay has blown! it is located behind the glovebox door above the heater blower. # find it # pull it out # replace it job done:-)
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do iget your fan to start blowing straight away on your range rover?
heater fan only works after about 15 minutes on my 89 plate range rover
What causes the heater blower motor in a 2003 Trailblazer to not work in speeds 1-3 but works in speeds 4 and 5?
Probably the blower motor speed resistor is partially burned out.
How do you fix a heater fan on an automatic 1986 Mercury Topaz?
Without knowing the symptoms, I can't pinpoint an answer. However, the most common problem with heater blowers are the resister stacks. When they fail, the fan only works on high speed and does not work on the lower speeds. It is strictly a dealer part around $30. Easy to replace.
Cause for low speeds on blower fan 1994 ford not to come on high speed works?
Resistor on the heater blower motor has failed
How do you get more power out of the 305 tpi?
install 350 heads with bigger valves works well for more torque at lower speeds
What is wrong with your Climate control heater works only on full power setting but not on automatic or lower settings Vectra CDX?
Defective heater blower motor resistor pack.
99 sunfire heater only works on full speed?
1) Check the blower motor, make sure it is not making any weird noises.2) Check the blower motor resistor, its located next to the motor. It is what controls the lower speeds of the motor. You can try to find one at the junkyard.
Do you have a bad switch if heater goes on and off all the time and fan only works on hi?
You most likely have a problem with your blower RESISTOR PACK or rheostat. This is what controls the high, med and low speeds on your heater. Where it is and how to change it depends on your vehicle.
2003 Chevy sivlerado heater blower quit working on speeds 1 2 only works on 3-5 whats the problem?
The blower motor resistor is bad.
You have a rover 400 the fan heater only works on no3 no 4 on the control switch but does not operate on the lower speeds why?
The resistor pack has burnt outremove the glove box cover and you will see a wiring conector going into a black plate with 2 Phillips screws.remove wiring and screws and remove resistor pack and replacedealer price around �3030 mins to changeVERY VERY COMMON PROBLEMwww.freewebs.com/hometekANSWER 2Visit www.rezpax.com for the answer to all questions relating the subject of missing fan speeds.Purchase replacement ceramic resistorsDownload the Removal & Repair GuideSend them your faulty Heater Resistor Pack for repairAll saving you many many £££'swww.rezpax.com
Is the rover 75 a good car?
in my opinion yes, i got my 75 rover a while back and it still works perfectly
How do you find fault on heater fan not workin mk3 mondeo?
If all speeds do not work, suspect the fuse, the switch, the switch connector or the blower motor. If only high speed works, suspect the blower motor speed resistor. If low speeds work and not high, suspect the blower motor relay.
