You measure the ambient temperature before the experiment in case the experiment is sensitive to ambient temperature. You want to record all of the environmental factors that might affect the experiment before starting it. You measure the ambient temperature after the experiment for the same reason, and also in case the experiment affected the ambient temperature. Depending on the experiment, environmental factors may need to be considered when analyzing the results.
Be clear about the purpose of the experiment.
the answer is experiment
Scientist need a plan before an experiment because if they don't have a plan the experiment wont come out right. And in science you work with allot of chemicals, so if your experiment had to work with chemicals and you don't have a plan you can burn your self and something can explode. they use the method....
If water is not still before an experiment then if the experiment involves measuring water then the measurement would not be accurate. Also if there is something in the water you might spill it out and spoil your experiment.
He repeated his experiment because he wanted to make sure that it worked perfectly before describing the results to others.
You measure the ambient temperature before the experiment in case the experiment is sensitive to ambient temperature. You want to record all of the environmental factors that might affect the experiment before starting it. You measure the ambient temperature after the experiment for the same reason, and also in case the experiment affected the ambient temperature. Depending on the experiment, environmental factors may need to be considered when analyzing the results.
Ambient food is food which is kept and served at the same temperature as room temperature. I.e it is food which does not require refrigeration or heating before eating.
About 4-7 days, depending on ambient temperature.
Because the air has had all night to cool down from the lack of solar energy.
h
The water must absorb sufficient heat energy to raise its temperature to the boiling point PLUS the Latent Heat of Vaporization at that Temperature and Ambient Pressure..
The thermometer reading will change from reading the solution temperature.
So that you do not introduce germs to the person whose temperature is to be measured.
to guarantee the ice is at 0°C
A 15 amp breaker will trip at 15 amps at an ambient temperature of 104 degree F. If the ambient temperature is higher the breaker will trip before 15 amps and if the ambient temperature is lower the breaker will trip after 15 amps. I would suspect the circuit is overloaded. But, you can change the breaker and see what happens. Just swap it with another one.
Not as a result of weather, but temperatures at or above that have been measured in studying hot springs and volcanoes.
That varies on driving style, ambient temperature, idle time, average speed, etc. It could be any where from 1500 miles to 6000 miles.