cause ur incrising presure by presuring the pipe
Erosion / pipe bursting /pressure vessel failures
Your question has an error, the pressure increases as area of pipe decreases or the pressure decreases as the area of pipe increases. Answer: Conservation of energy
Due to friction between the fluid and the walls of the pipe, pressure increases within the pipe.
Due to friction between the fluid and the walls of the pipe, pressure increases within the pipe.
You speed up the pump, which increases its pressure on the solid or liquid. Narrowing the pipe does not increase the pressure or flow rate, it only increases the speed at which the liquid or gas passes by a given point.
The pressure increases as the volume decreases, so when the pipe is changed from large to small, the pressure of the gas will increase.
If water is flowing through pipe, no head pressure can build up. Blocking off flow of water will create head pressure in pipe as long as pipe is vertical. A vertical column of water creates head pressure.
I think velocity is directly proportionate to its applying pressure.
PRESSURE INCREASES are normally effected by raising the height of water supply to increase the downflow. If this is not possible, increase the bore of the supply pipe from your tank.
when air is blown through the paper pipe, the velocity inside the pipe increases and according to Bernoulli's theory the pressure inside the pipe deceases. And the pipe squeezed.
Yes, as long as the water coming out of the pipe has a greater pressure than the water that is covering the pipe. If it is the other way around, the water covering the pipe will actually flow into the pipe. Think about it. It just makes sense.
The pressure will rise, but you haven't given us anyvolume or pressure figures to begin with .