0
Yes, it will but only within local network.
Wiki User
∙ 13y ago
Wiki User
∙ 11y agoyes only within local network
Add your answer:
Earn +20 pts
How do i access my link sys router?
If below does not work you can go to Start>Run . Type cmd into the box and hit ENTER. You will be presented with the Command Prompt Window. Type ipconfig and hit ENTER. Take the number after "Default Gateway" and launch your internet browser. In the address bar type that number and hit ENTER. Launch your browser. In the address bar type 192.168.1.1 (the default gateway IP address for Linksys routers).
You can ping a computer that you are trying to transfer files to via FTP but you can't communicate using FTP?
Many computers respond to ping requests by default. FTP generally requires additional configuration or software to work. There may be no FTP services running on the target computer, or the firewall/router configuration may be incorrect.
Do I have to use a gateway battery with my gateway laptop?
Gateway products often utilize unusual sizes of hardware to make sure you have to go through them to get replacement parts. Another Gateway battery is guaranteed to work, but if you can find another that is the same dimensions it should work just as well.
USB wireless adapter will not stay connected to network Help please?
I was having the same problem, try changing your routers wireless channel. To do this you will need to get your default gateway so you can log on to your router. Go to command prompt on your computer and type in ipconfig it should come up with some numbers, find the one that says default gateway (123.456.7.8) and type it in your browser of choice. It should ask for a Username and Password, usually default is username: admin password: password. Once logged on go to wireless settings and just change your channel. I did this because of interference with my wireless channel. This worked for me and maybe it will work for you.
How does vrrp work?
Virtual Router Redundancy Protocol (VRRP) enables you to set up a group of routers as a default gateway router (VRRP Group) for backup or redundancy purposes. This way, the PC clients can actually point to the IP address of the VRRP virtual router as their default gateway. If one of the master routers in the group goes down, one of the other routers can take over. Routers can function as master or backup routers, and you can actually configure up to 255 virtual routers on a router interface. Of course, there are platform constraints like router memory, for instance. Additionally, VRRP is intended for use with IPv4 routers only.
How do you ping on cmd?
Simply type 'ping', leave a space, and then type the website you wish to retrieve the IP address of. For example, a ping request for WikiAnswers.com would look like this:c:/ ping wikianswers.comThis should work with any website.
Can you play Minecraft on a gateway ne56r10u?
yes minecraft will work and run it might freeze sometimes but it will work :)
What are the work sheets called in default?
By default there are initially 3 worksheets and they are called Sheet1, Sheet2 and Sheet3.
Does the 2wire 1701HG gateway modem work on pipex?
Put simply, yes it will.
What do you use for two networks that work on two different network protocols?
Gateway
What is the function of the command - Is?
The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
How do you host Warcraft III The Frozen Throne?
If you have an "Linksys" router this is how I did it. First off, you go to your Search Bar in your "Start" button. There you will see it and type in it CMD. Click on that and it should look like a big black screen. In the big black screen type in IPCONFIG "enter". Scroll down until you see an Default Gateway. It should like something like this Default GateWay . . . . . . . 192.168.1.1 (This is my Default Gateway btw) remember that code and go to your Mozilla Firefox/Internet Explorer and in the search engine type in your Default Gateway you previously got. A Mini pop-up should be there after you type that in and type in admin for your username and for your password. This will only work if you havent already changed your username and your password in Linksys Router. A site should pop-up, go to Applications and Gamings and type in Warcraft3 in the first box. Put in 6112 in the 1st port than 6119 in the end port. For your IP address you go back to your run and CMD thing, type in the IPCONFIG and find your IPv4 Address, look at the last numbers in that address and put that in the IP address thing. Once you have that done, Enable the Enabling checkmark thing, save the changes and go to your warcraft III menu. Go to your Options-Gameplay and make sure you have your Port Number to 6112. Go to Battle.Net and your free to host.
